Craftsman 917.276221 Owner's Manual page 55

SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
o1
L_
ONLY RIDE UP AND DOWN HILL,
NOT ACROSS HILL
15 DEGREES MAX.
_) ARNING: To avoid serious injury, operate your tractor up and
down the face of slopes, never across the face. Do not mow
slopes greater than 15 degrees. Make turns gradually to prevent
tipping or loss of control. Exercise extreme caution when
changing direction on slopes.
1. FoBd this page aBong dotted line indicated above,
2. Homd page before you so that its Belt edge is vertically paraHemto a tree
trunk or other upright structure.
3. Sight across the foBd in the direction of hill slope you want to measure.
4. Compare the angle of the foBd with the sBope of the hill.