Viewing A Video Tape - Optimus 110 Owner's Manual

16-547.fm Page 22 Tuesday, July 20, 1999 4:45 PM

VIEWING A VIDEO TAPE

Loading a Video Tape
1. Turn on the TV and set it to the same chan-
nel as the VCR's 3 CH. 4
Note: If you are using a TV/monitor that is
connected to the VCR's
jacks, set the TV/monitor to the video
mode.
2. Hold the cassette with the main label fac-
ing up and the spine facing out from the
VCR. Then insert the cassette into the
VCR's compartment and gently push the
center of its spine until the VCR draws it in.
The VCR automatically turns on. If the erase-
protection tab has been removed from the cas-
sette, playback automatically begins (see
"Erase Protection" on Page 26).
Caution: Never insert anything except a VHS
video cassette into the cassette compartment.
Anything else might damage the VCR.
Playing a Video Tape
1. Load a video tape.
2. If playback does not automatically begin,
press . The VCR plays the tape.
PLAY
Notes:
• The following screen appears when you
press
PLAY, FF, REW,
out inserting a cassette.
22
switch.
AUDIO/VIDEO OUT
3. (Model 60 only) Follow these steps to
4. To stop playback before the end of the
5. To eject the tape, press
Notes:
or with-
REC/TIME
NO CASSETTE
PLEASE INSERT A CASSETTE
• During playback, the VCR automatically
adjusts tracking, but you can manually
adjust it if necessary (see "Manually
Adjusting Tracking" on Page 25).
choose the type of audio you want the
Model 60 to play back.
To select the audio output option:
a. Press , hightlight
MENU
using , then press
SEL s / t
b. Highlight
SET AUDIO MODE
, then press .
s / t SET
c. Highlight PLAY AUDIO
then press until the desired option
SET
— HIFI or NORMAL — appears.
d. Repeatedly press
MENU
normal screen.
Note: If you play a tape recorded on a
standard VCR, the Model 60 plays the
standard audio track, regardless of the
audio output setting.
tape, press STOP .
the VCR.
• If the tape reaches the end before you
press , the VCR automatically
STOP
stops the tape and completely rewinds it.
If the erase-protection tab has been
removed, the VCR then ejects the cas-
sette.
• When the VCR is off, you can press
STOP/EJECT to eject a tape. The VCR
ejects the tape then turns itself off.
SET UP VCR
.
SET
using
SEL
using ,
SEL s / t
to return to the
on
STOP/EJECT