Craftsman 917.389270 Owner's Manual page 5

HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables.
• Raise handles until lower handle
section locks into place in mowing
position.
• Remove protective padding, raise
upper handle section into place on
lower handle and tighten both handle
knobs.
• Remove handle padding holding
operator presence control bar to upper
handle.
• Your lawn mower handle can be
adjusted for your mowing comfort.
Refer to "AdjustHandle" in the Service
and Adjustments section of this manual.
Operator
presence
control bar
handle
Lift up
Lower
handle
up
Mowing
position
TO INSTALL ATACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert to
bagging, see =To convert mower _ in the
OPERATION section of this manual.
5