Lawn Mower - Craftsman 917.388751 Owner's Manual

6.5 horsepower 21" rear discharge rotary lawn mower
Table of Contents

Advertisement

Available languages

Available languages

MUFFLER
Inspect and replace corroded muffler as it
could create a fire hazard and/or dam-
age.
SPARK
PLUG
Replace
spark
plug at the beginning
of
each mowing
season
or after every
100
hours of operation,
whichever
occurs
first.
Spark plug type and gap setting
are
shown in "PRODUCT
SPECIFICATIONS"
in Maintenance
section
of this manual.
CLEANING
IMPORTANT:
For best performance,
kiip
mower
housing
free of built-grass
and
trash. Clean the underside of your mower
after each use.
_:_ WARNING:
To avoid serious
injury,
A('_CAUTION:
Disconnect
spark plug wire
from spark plug and place wire where it
cannot come in contact with the spark
plug.
• Clean the underside of your lawn
mower by scraping to remove build-up
of grass and trash.
• Clean engine often to keep trash from
accumulating.
A clogged
engine
runs
hotter and shortens
engine
life.
* Keep finished
surfaces
and wheels
free
of all gasoline,
oil, etc.
• We do not recommend
using a garden
hose to clean lawn mower
unless the
electrical
system,
muffler, air filter and
carburetor
are covered
to keep water
out.
Water in engine can result in
shortened
engine
life.
before
performing
any service
and
adjustments:
1. Release
control
bar and stop engine.
2.
Make sure the blade and all moving
parts have completely
stopped.
3.
Disconnect
spark plug wire from spark
plug and place where it cannot come
in contact with plug.
LAWN MOWER
TO ADJUST
CUTTING
HEIGHT
See "TO ADJUST
CUTTING
HEIGHT"
in
the Operation
section of this manual.
REAR
DEFLECTOR
The rear deflector, attached between
the
rear wheels of your mower, is provided to
minimize the possibility that objects will
be thrown out of the rear of the mower into
the operator mowing position.
If the
deflector becomes
damaged,
it should be
replaced.
TO ADJUST HANDLE
The handle on your lawn mower has
three (3) height positions - adjust to
height that suits you.
NOTE: The upper handle has an "anti-
fold" bracket located on the left side of the
handle. This bracket prevents the upper
handle from folding forward, which helps
protect control cable(s) from damage.
° Squeeze the bottom ends of lower
handle towards each other until the pin
in handle can be inserted into one of
the three height adjustment holes.
Anti-fold
pin
Handle
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents