OperatorSafety Read these safety ruJes and foiJowthem cJoseJy. F ailure to obeythese rules couJdresult in loss of controJ of unit, severepersonal injuryor death to you, or bystanders,or damage to propertyor equipment. The _,triangJe in text signifiesimportantcautionsor warningswhichmust be followed. GeneralWarnings Safety Decals * Know the unit's controls and how to stop quickly.
Assembly NOTE:In this manual, "left" and "right" are always defined from FrameAssembly the standpoint of the operator position facing forward from seat. 1. insert capscrew (A, Figure3) through hole of catcher latch (B) and grass catcher frame (C). Secure with Iocknut (D). _WARNING: Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and...
Assembly 2. install shield (C, Figure7) to right side rear bumper (B) and CoverAssembly secure with existing screws (A). 1. Placecover (A, Figure 5) over top of grass catcher assembly (B) and insert frame pegs (C) through holes (D) of cover. 2.
Assembly 4. Slide lugs (D, Figure 11)into hinge lug retainers (E) to TubeAssembly secure (A) on deflector hinge (B). 1. Placetube latch (A, Figure 9) on bagger adapter 5. Secureadapter to the deck with bolt (F) and wing nut (G). assembly (B).
Assembly TubeInstallation insert bolts (A, Figure 16) through debris shield (B), holes of dust skirt and catcher frame. 1. insert catcher tube (A, Figure 13) in opening of grass Note: Debris shield need to be positioned close enough to catcher cover (B). catcher tube in order to prevent any gap betweentube and sheild.
Operation BeforeOperation Clearthe lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Checkgrass condition, if wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
Warranty LIMITED WARRANTY Briggs & Stratton Power Products Group, LLC wilt repair and/or replace, free of charge, any part(s) of the equipment that is defective in material or workmanship or both. Briggs & Stratton Corporation will repair and/or replace, free of charge, any part(s) of the Briggs and Stratton engine* (if equipped) that is defective in material or workmanship or both.