Advertisement
Theseaccessories wereavaHabla w hen this lawn mowerwas produced.They are not
shipped with your mower.They are alsoavailableat mostSearsretailo_ets andservice
centers. MostSearsstorescan alsoorderrepair.parts
for you,whenyou providethe model
numberof your lawnmower. Some of these accessories may notapplyto yourlawn mower.
LAWN MOWER
PERFORMANCE
CLIPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS
MULCHER KITS
GRASS CATCHERS
FOR
REARDISCHARGE
LAWN MOWERS
GRASS CATCHERS
FOR
SIDE DISCHARGE
LAWN MOWERS
LAWN MOWER
MAINTENANCE
MUFFLERS
BELTS
BLADES
AIR FILTSRS
BLADE ADAPTERS
WHEELS
STABILIZER
GAS CANS
SPARK PLUGS
ENGINE OIL
Read these instructions and this manual in
its entirety before you attempt to assemble
or operate your new lawn mower.
IMPORTANT:
This lawn mower is shipped
WITHOUT
OIL OR GASOLINE
in the
engine.
Your new lawn mower has been as-
sembled at the factory with the exception of
those parts left unassembled for shipping
purposes. To ensure safe and proper
operation of your lawn mower, all parts and
hardware you assemble must be tightened
securely. Use the correct tools as neces-
sary to ensure proper tightness. All parts
such as nuts, washers, bolts, etc., neces-
sary to complete the assembly have been
placed in the parts bag.
TO REMOVE
LAWN MOWER
FROM
CARTON
• Remove loose parts included with
mower.
• Cut down two end comers of carton
and lay end panel down flat.
• Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
• Roll lawn mower out of carton and
check carton thoroughly for additional
loose parts.
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage control cables.
• Raise handles until lower handle
section locks into place in mowing
position.
• Remove protective padding, raise
upper handle section into place on
lower handle and tighten both handle
knobs.
4
Advertisement
