FULL YEAR WARRANTY SEARS 4 1/2" ANGLE GRINDER If this Sears Angle Grinder fails to give complete satisfaction within one year from the date of purchase, return it to any Sears store in the United States and Sears will repair it or replace it, free of charge.
19. OUTDOOR EXTENSION CORDS. When tool is used out- AUXILIARY HANDLE (FIG. 2) doors, use only extension cords intended for use outdoors and so An auxiliary handle is furnished with your grinder and can be screwed marked. into either side or the top of the front housing, as shown in Figure 3. 20.
FIG. 5 WRONG • RAISED PORTION OF FLANGE TOWARD SPINDLE WRONG BACKING FLANGE RAISED PORTION OF WHEEL TOWARD FLANGE RIGHT DEPRESSED CENTER WHEEL I 10 ° tO 15° _--.-RAISED FIG. 4 SHOULDER TOWARD REMOVING DISC SHER WHEEL TURN OFF AND UNPLUG TOOL Using a cloth or glove to protect your hand, turn the disc assembly counter-clockwise to remove it from the tool spindle.
MOTOR BRUSHES Your tool i sequipped with aspecial brush system. When the brushes become worn o ut, t he tool will a utomatically stop a nd prevent damage to the motor. Brush replacement should beperformed by Sears Service Centers orother qualified service organizations. RECOMMENDED ACCESSORIES See your local Sears Store for a wide array of accessories.
Page 8
® 4 1/2" ANGLE GRINDER INSTRUCTION MANUAL Now that you have purchased your 4 1/2" Angle SERVICE Grinder, should the need ever exist for repair parts or service, simply contact any Sears Service Center and most Sears, Roebuck and Co. stores. Be sure to provide all pertinent facts when you call or visit.