Poulan Pro PP4620AVX Instruction Manual
Hide thumbs
Also See for PP4620AVX:
- Instruction manual (59 pages) ,
- Catalog (20 pages) ,
- Parts list (2 pages)
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
PoulcmnPRO B
Please do not return unit to retailer.
Por favor, no devuelva
el aparato al lugar de compra.
Veuillez ne pas retourner
I'outil au detaillant.
•
1-800-554-6723
www.poulan-pro.com
Instruction
Manual
Manual de Instrucciones
Manuel d'lnstructions
PP4620AVX
WARNING:
Read and follow atl Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones
y siga todas Ias advertencias
e en-
strucciones
de seguridad,
El no hacerto puede resultar en tesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous tes avertisse-
ments et routes les instructions de s_curit& Tout defaut de le faire
pourrait entrainer des bIessures graves.
Poulan PRO
t030 Stevens Creek Road
Augusta,
GA 30907
Poutan PRO
6150 McLaughlin Road
Mississauga, Ontario L5R 4C2
545186803
Rev, 1
6/15/08
BRW
B
Advertisement
Related Manuals for Poulan Pro PP4620AVX
Summary of Contents for Poulan Pro PP4620AVX
- Page 1 Lire le manuel d'instructions et bien respecter tous tes avertisse- ments et routes les instructions de s_curit& Tout defaut de le faire pourrait entrainer des bIessures graves. Poutan PRO Poulan PRO t030 Stevens Creek Road 6150 McLaughlin Road Mississauga, Ontario L5R 4C2...
- Page 2 Read and understand instruction manual before saw can be dangerous! Care- using the chain saw. lessor improper use can cause ARNING! This chain serious or even fatal injury A_ways wear appropriate ear protection, eye protection and head protection. A_ways two hands when operating chain...
- Page 3 goggles or face s creen; an approved safety • With the engine stopped, hand carry the hard h at; and sound barriers (ear plugs or chain saw with the muffter away from your mufflers) toprotect your hearing. Regular body, and the guide bar and chain to the users should have hearing checked...
- Page 4 • Pinch-Kickback can occur when the the Make sure the chain brake nuts are se- wood closes inand pinches the moving curely tightened after tensioning the chain saw chain inthe cut a long the top ofthe • Begin and continue cutting at full speed. guide bar a nd t he saw chain i ssuddenly the chain is moving at a slower speed, there stopped.
- Page 5 KICKBACK SAFETY FEATURES dnI, WANl_lll_l£,i; WE DO NOT REP- _ll WARNING: Thefol_owing f eatures RESENT SHOULD SUME THAT CHAIN BRAKE WILL are included on your saw to help reduce the PROTECT IN THE EVENT hazard of kickback; however, such features KICKBACK.
- Page 6 Computed kickback angle (CKA) Table CHAIN P/N CKA without chain brake MODEL Length 952051310 PP4620AVX 952044815 NOTE: If this saw is to be used for commer- SPECIAL NOTICE: Your saw is equipped cial logging, a chain brake is required with a temperature limiting muffler and spark shall not be removed or otherwise...
- Page 7 Loosen and remove bar knob completely b_{lifting lever and turning counterclock- Back wise. view of _ctutch Adjusting Remove clutch cover. Remove the plas- 10 Instalt bar knob and finger tighten only. tic shipping spacer (if present). Do not tighten any further at this point. Once chain is tensioned,...
- Page 8 Tighten _ Loosen Push lever on bar knob down to return le- ver to closed/locked position. chain chain WARNING; Failure ta push lever on knob down to closed/locked position could resu{t in serious personal injury damage to your chain saw. Use a screwddver to move chak_ around guide bar...
- Page 9 Chain Brake Cylinder Cover Threftie Lock-out Direction of Chain Rear Travel Handle Throttle Guide Bar Clutch Catcher Choke/Fast Cover Adjusting Idle Lever Wheel Knob ON/STOP SWITCH CHAIN BRAKE The ON/STOP SWITCH is used to stop the The CHAIN BRAKE is a device designed engine.
- Page 10 Drain the gas t ank, start the high temperature thinning, if Poulan or engine and let i trun until the fuel lines and Poulan PRO bar a nd chain o ilisnot carburetor are empty Use f resh f uel next available, use agood grade SAE 3 0 oil.
- Page 11 • The inertia-activated chain brake CHOKE/FAST iDLE LEVER activated if the front hand guard is pushed ,.. =II forward, either manually hand) automatically (by sudden movement) • If the brake is already activated, it is disengaged by pu,ing the front hand guard back toward the front handle...
- Page 12 • Release the throttle trigger as soon as made on the opposite side of tree, the tree will tend to fall into the notch. the cut is completed, allowing the en- gine to idIe If you run the saw at full NOTE: If the tree has large buttress roots,...
- Page 13 CUTTING A FALLEN TREE AIways make your first cut on the compres- sion side of the log. The compression side of (BUCKING) the Iog is where the pressure of the log's Bucking is the term used for cutting a fallen weight is concentrated.
-
Page 14: Limbing And Pruning
LtMBING st Cut • AIwayslimbatreeafteritiscutdown Only then can limbing be done safely and prop- edy. • Leave the larger limbs underneath relied tree to support the tree as you work. • Start at the base of the felled tree and work toward top, cutting... - Page 15 FILTER Loosen and remove the 2 muffler bolts. Remove the muffler and backplates CAUTION: Do not clean fitter in gasoline tice the orientation of these parts for re- or other flammable solvent to avoid creating assembling. a fire hazard or producing harmful evapora- Locate the 2 outlet cover screws on the...
- Page 16 • Turn idle speed screw (T) counterclock- Tool8 required: wise to decrease engine speed. • 5/32 inch (4 ram) diameter round file and file holder If you require further assistance or are unsure • Flat fiIe about performing this procedure, contact your authedzed service...
-
Page 17: Ignition Timing
Hook Angle tf you require further assistance or are unsure about performing this procedure, contact your 0025 inch fiLT authorized service dealer or call our customer assistance help line at f-800-5,54-6723. IGNITION TIMING ignition timing is fixed and nonadjustable Right Corner SPARK PLUG... -
Page 18: Troubleshooting
ENGINE • At the beginning of the next season, only fresh fuel having the proper gasoline • Remove spark plug and pour 1 teaspoon to oil ratio of 4-0:t, 2-cycle engine oil (air cooled) OTHER through the spark plug opening. Slowly puli the starter rope 8 to 10 times to distrib- •... - Page 19 Poulan PRO fective if the diagnostic work is performed cannot deny warranty solely for the Iack of an approved PouIan PRO servicing...
- Page 20 service center or call Poulan sion feinted parts will be provided without 1-800-554-6723. WHERE TO GET WAR- charge to the owner if the part is under war- RANTY SERVlCE: Warranty services or re- ranty. EMISSION CONTROLWARRANTY pa{rs shalt be provided at all Poulan PARTS LIST: Carburetor,...