Frigidaire FRT18S6AQ2 Use & Care Manual page 9

Door Removal and Reversal Instructions (continued]
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to top of refrigerator door.
2. Remove button plug using edge of putty knife.
3. Remove screw on side of refrigerator door and remove handle.
4. Reverse freezer and refrigerator handles as shown in figure 3.
,-Screw
Button
Plu
Refrigerator Door Without Trirr
]die
TO ATTACH REFRIGERATOR HANDLE:
1, Secure side of nana_e to Goor an(] replace plug DLITTon
2, Secure handle to _oD DfGoor,
Figure 3 - Handle Reversal
REMOVING STAINLESS STEEL DOORS AND HANDLES
To Remove Deers
Stainless steel doors are not reversible. Follow these steps to remove doors.
1. Remove toe grille and top hinge cover.
2. Remove top hinge and lift freezer door off of center hinge pin. Set door
aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside,
5. Remove center hinge and shim by removing inside screw and loosening
two outside screws enough to allow hinge to slide out.
6. Remove bottom hinge. Reinsert two outside screws in holes and tighten,
7. Reverse steps 1 - 6 to reinstall doors
To Remove Hand/es
1. Firmly hold freezer handle while loosening set screws with 3/32" allen
wrench. Remove freezer handle.
2. Repeat step 1 for refrigerator door,
Shoulder Set
Screw Screw
Typical Handle