Table of Contents
Advertisement
Connecting The Water Supply
ABOUT YOUR REFRIGE TOR'SWATER SUPPLY
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The automatic
ice & water dispenser
on your refrigerator
requires
a permanent
water supply to function
correctly.
During
installation,
you (or a service
professional)
establish
this water supply by connecting
a copper tube from your
household
water system
to a valve at the rear of the refrigerator.
You may have already
followed
the directions
in the Installation
Instructions
to
connect
the water supply. This information
is repeated
here for future reference
if
you need to relocate your refrigerator.
Whatyou willneed:
•
Access to a cold water line with pressure
of 30-100 psi.
•
Copper
tubing with ¼-inch (6.4mm)
OD. Length for this tubing
is the distance
from the rear of the refrigerator
to your household
water supply line plus
7
feet (2.1 meters).
•
A shut-off valve for the connection
between
your household
water line and
the refrigerator
supply line.
Do not use a self-piercing
shut-off valve.
•
A compression
nut and ferrule
(sleeve)
for the water supply connection
at the
rear of your refrigerator.
Advertisement
Table of Contents
