Advertisement
Operating Instructions
(continued)
Options Selections
Hi-Temp Wash
When HI-TEMP
WASH
option
is selected,
the
dishwasher
heats water in the main wash to
approximately
140°F (60°C).
This increase
in water temperature
helps
dishwasher
detergent
remove food grease and soil
from dishes
more effectively
and aids in drying.
HI-
TEMP WASH option can be used with all cycles
except
CHINA
CRYSTAL
(some models)
and
RINSE
ONLY.
HI-TEMP
WASH
is automatically
provided
when POTS
& PANS cycle is selected.
When HI-TEMP
WASH
option
is selected,
the
light above the pad will come on and remain
on
until end of cycle. To turn off the HI-TEMP
WASH
option, press the pad a second time. The light
above the pad will turn off.
Sanitize
Option
To sanitize
your dishes and glassware,
select the
SANITIZE
option. When selected,
the light above
the pad will come on and remain on until end of
cycle. The water temperature
in the final rinse will
be raised to 155°F (68°C) and will maintain
that
temperature
for 9 minutes.
This option is available
in Pots & Pans, Normal and Light (Both Racks)
cycles.
Only these sanitization
cycles
have been
designed
to meet NSF requirements.
The cycle time will be extended
until the proper
water temperature
is reached.
Washing
action will
continue
during the water heating
delay. For best
results, the incoming
water temperature
should
be
at least 120°F (49°C).
The sanitize
criteria
may not be satisfied
if there is
an interruption
of the cycle, power failure
or if the
incoming
water temperature
is below
120°F
(49°C).
To turn off the SANITIZE
option, press the pad a
second time. The light above the pad will turn off.
No Heat Dry
NO HEAT DRY option
saves electricity
since the
heating
element
is off during drying portion of
cycle. When selected,
the light above the pad will
come on and remain on until end of cycle. To
speed the drying process,
open the door slightly
after the cycle is complete.
Some water droplets
may remain on door and tub and in areas where
dishes touch silverware
basket
and rack.
To select
heated dry, press the pad a second time.
The light above the pad will turn off. Heated dry
provides
faster drying since the heating
element
is
on during the drying portion of the cycle.
You may see water vapor coming from the vent
during the drying portion
of cycle. The vent is
closed during washing
to hold moisture
and sound
inside. The vent opens during the last few minutes
of the final rinse and remains
open for drying. The
drying option
may be changed
at any time during
the cycle and affects
only the drying
period.
Opening
the door longer than one minute during
the dry cycle cancels
the selected
dry program.
Delay Start
The DELAY
START
option allows you to
automatically
delay starting
your dishwasher
from
1-10, 1-24 or 2-4-6 hours depending
on your
model.
On models with 1-10 or 1-24 hour delay, press the
DELAY
START
pad until the desired
delay time
shows
in the STATUS
window.
A light will come
on indicating
the delay start hours and will remain
on until cycle starts.
On models with 2-4-6 hour delay, press the pad
once for a 2 hour delay, twice for 4 hours and three
times for 6 hours. A light will come on
indicating
the delay start hours and will remain on
until cycle starts.
To cancel the DELAY
START
option and begin the
cycle before the delay period is over, press the
START/CANCEL
pad.
To Cancel
a Cycle
You can cancel
a cycle anytime
during the cycle.
Press START/CANCEL
pad and the dishwasher
will start a 90 second
drain. At the end of the drain,
select the desired
cycle.
Advertisement
