Table of Contents
Advertisement
MINIMUM
AND
MAXIMUM
CONTROL
PAl) SETTINGS
All of the features listed below have minimum and maximum time or temperature
settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout
pad is delayed 3 seconds).
An ENTRY ERRORtone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature,
:/77°C
550°F/288°C
BROIL
400°F/205°C
550°F/288°C
CONVECTION
BAKE
170°F/77oC
550OF/288°C
i
CONVECTION
ROAST
170°F/77°C
550°F/288°C
TIMER
12 Hr. Mode
0:01
Min,
11:59 Hr./Minl
24 Hr. Mode
0:01 Min.
11:59 Hr./Min.
i
CLOCK TIME
12 HF. Mode
1:00 Hr.iMin:
12:59 Hr.iMinl
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
DELAY START
12HF.
Mode
1:00 Hr./Min:
12:59
Hr./Min:
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
i
COOK TIME
12 Hr. Mode
0:01 Min,
.............................................
11:59 Hr./Min:
24 Hr. Mode
0:01 Min.
11:59 Hr./Min.
i
SETTING
THE
CLOCK
The Clock pad isused to setthe clock. T he clockmay
be setfor12 or 24 hourtime of
day
operation. The clock
has been preset at thefactory forthe 12 hour operation.
When the range isfirst pluggedin, OF when the power
supplyto the range has been interrupted,
thetimerinthe
display will flash.
To set the clock (example below for 1:30)
1.
Press Clock. "CLO" will appear in the display.
2.
Press 1:30
pads to set the time of day to 1:30.
"CLO" will stay in the display.
3.
Press Start. "CLO" will disappear and the clock will
start.
CHANGING
BETWEEN
12 OR
24 HOUR
TIHE
OF DAY
DISPLAY
i. Pressand holdClock for7 seconds.
2.
After 7 seconds, "12h"
or "24h"
will appear in the
display and the control beep once.
3.
Press Self clean to switch between the 12 and 24
hour time of day display. The display will show either
"12h"
or "24h"
4.
Press Start to accept the change or press Cancel to
reject the change.
5.
Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.
SETTING
CONTINUOUS
BAKE
OR
12
HOUR
ENERGY
SAVING
The Timer and Self clean pads control the Continuous
Bake or 12 Hour Energy Saving features. The oven
control has a factory preset built-in 12 Hour Energy
Saving feature that will shut off the oven if the oven
control is left ON for more than 11 hours and 59 minutes.
The oven can be programmed to override this feature for
Continuous Baking.
To set the control for Continuous
Bake or 12 Hour
Energy Saving features
1.
Press and hold Timer for 7 seconds. After 7 seconds
"12h"
or "= =h" will appear in the display and the
control will beep once.
2.
Press Self clean to switch between the 12 Hour
Energy Saving and continuous bake features. Note:
"12h"
in the display indicates the control is set for the
12 Hour Energy Saving mode and % =h" indicates the
control is set for the Continuous Bake feature.
3.
Press Start to accept the change (display will return
to time of day) or press Cancel to reject the change.
Advertisement
Table of Contents
