Assembly; How To Assemble Your Chain Saw; Bar And Chain Assembly - Craftsman 358.356242 Operator's Manual

,m, = , ,,,i,ii = , i,,,,,= = =r ,,,,=
WARNING: ............. !
IF THIS UNIT IS RECEWED ASSEMBLED, I
REPEAT ALL STEPS IN THIS SECTION |
TO BE SURE ASSEMBLY IS CORRECT |
AND PROPERLY ADJUSTED FOR THE i
OPERATOR.
!
HOW TO ASSEMBLE YOUR
CHAIN SAW
BAR AND CHAIN ASSEMBLY (Fig. 6-13)
DANGER:
DO NOT START THE ENGINE WITHOUT
THE GUIDE BARAND CHAIN COMPLETELY
ASSEMBLED. OTHERWISE,, THE CLUTCH
CAN COME OFF AND SERIOUS INJURY,
CAN RESULT.
, i
• Loosen and remove the 2 bar clamp nuts.
• Remove bar damp.
- Remove and throw away blue shippingspacer.
-=------- Bar Clamp
=--.- Bar Clamp Nuts
Figure 6
• Turn adjusting screw byhandcountemlockwise until ad-
justing pin just touches the stop.
Adjusting
Screw
Adjusting Stop
Pin
Figure 7
*Mount guide bar withslotted e nd overbothguide bar
mounting bolts. Slide guide bar t_ehindctut_h drum' until
guide bar stops.
= i J,,== ,,,,,
\
Guide Bar
Clutch Drum Guide Bar
Mounting Bolts
f
Figure 8
• Carefully remove chain from bag. Hold chain with the
i ddve links. Fig 9.
• Place chain over and behind the clutch drum. Fig 10.
* Frt bottomof drive links between teeth in sprocketnose.
• Rt chain drive linksinto top of guide bar. Rg 11.
Behind the
Cutters Depth Clutch Drum
t Gauge
\1/
Drive
Links
Rgure 9
Rgure 10
Guideear
Mounting Belts
Figure 11
Nose
Guide Bar
-7-