Table of Contents
Advertisement
Available languages
Available languages
Air Hose Replacement
The air hose attached to your compressor
has an
integral pressure adjusting valve at the working end of
the hose. Should service or replacement be required,
make sure that the pressure adjusting valve is present
in the air hose line.
DO NOT replace the hose
with standard hose that is
not equipped with the pressure adjusting
valve. The appropriate
hose assembly for
your compressor is available at Sears.
Do not allow hose to
become kinked or
pinched at any time.
This is important to
avoid damage to your compressor
and to
maintain pressure adjusting valve control.
1.
2.
Set the On/Off switch to "OFF" and unplug the
cord.
Relieve all pressure from the air compressor
head
and air hose by turning the adjustable pressure
valve to 10 PSI.
3.
Protect the electrical cord and air hose from dam-
age by winding them loosely around the air com-
pressor.
4.
Store the air compressor
in a clean and dry loca-
tion.
11- ENG
A08593
Advertisement
Table of Contents
