Carburetor; Engine Speed - Craftsman 3One 917.372823 Owner's Manual

SERVICE AND ADJUSTMENTS
TO ADJUST HANDLE (See Figs, +17thru 19)
Your lawn mower handte can be raised or lowered for your
mowing comfort,, Four (4) positions are availabte: high,
medium high, medium low and low., Handles are shipped
mounted in the medium low position.
- To change from medium t0w to medium high position,
the upper and lower handle sections will have to be
turned over (See Fig+ 17B) ....
- Remove the controls and operator presence control
bar from the upper handle,
- Remove the starter rope guide from the lower handle+
. Remove hairpin cotters,,
° Disconnect the lower handle from the handle brackets
(See Fig, 19)
o Turn the hanClle over and reassemble the hairpin
cotters that have been removed.
° Reassembte the starter rope guide.
° Reassemble the controls and the operator presence
control bar to the upper handle..
CAUTION: The operator presence con-
trol bar must pivot freely to permit blade
brake engagement when control bar is
released. Do not overtighten the fas,
tenets holding the controls to the up-
per handle.
* To change from medium tow to high posiiion only the
upper handte section will have to be turned over (See
Fig,, 18A)+
o To change from medium low to low position, only, the
lower handle section will have to be turned over (See
Fig. t8B),
SHIPPING POSITION
MEDIUM LOW
MEDIUM HIGH
FIG, 17A FIG. 17B
LOW
ENGINE
ENGINE SPEED
The engine speed has been ?actoryset. Do not attempt to
increase engine speed as it may result in.personal injury,.
If you betievethe engine is running too fast or too slow, take
your lawn mower to an authorized service center/depart+
ment for repair and adjustment.
CARBURETOR
Your carburetor has a non-adjustable fixed main jet for
mixture control, If your engine does not Operate properly
due to suspected carburetor problems, take your lawn
mower to an. authorized service center/department for
repair and adjustmenL
FIG. 18A FIG, 1BB
t\ LOWER HANDLE
FIG. 19
15