Before Each Start-Up; How To Start - Craftsman 919.184191 Owner's Manual

Before Each Start-Up:
f. Place On/Auto/Off lever to
"OFF".
2. Close the globe valve.
3.
Attach hose and accessories.
NOTE: A regulator MUST be
installed when using accessories
rated at less than 120 PSI.
Risk of Bursting.
Too much air
pressure causes a hazardous risk
of the air tank bursting, Check the
manufacturer's maximum pressure
rating for air tools and accessories,
The regulator outlet pressure must
never exceed the maximum
pressure rating.
How to Start
1. Turn the On/Auto/Off lever to
"AUTO" and allow air tank
pressure to build. Motor will
stop when air tank pressure
reaches "cut-out" pressure.
2. When the air tank pressure
reaches "cut-out" pressure open
the globe valve.
IMPORTANT: When using regulator
and other accessories refer to the
manufacturer's instructions.
D30091 16_ ENG