Operation; Know Your Trimmer; Before Starting Engine; Fueling Engine - Craftsman WEEDWACKER 358.795521 Instruction Manual

KNOW YOUR TRIMMER
READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT, Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
Assist Handle
Tube
Shield _i._ Trh_qmer
Head
Throttle Trigger ON/STOP
Switch S Plug Line Limiter
Blade
Starter
Rope
Choke Lever
Primer Bulb
Fuel Mix Fill Cap
ON/STOP SWITCH
The ON/STOP switch is used to stop en-
gine. To stop the engine, push and re-
lease the engine ON/STOP switch.
PRIMER BULB
The PRIMER BULB removes air from
the carburetor and fuel lines and fills
them with fuel. This allows you to start
the engine with fewer pulls on the
starter rope. Activate the primer bulb
by pressing it and allowing it to return
to its original form.
CHOKE
The CHOKE helps to supply fuel to the
engine to aid in cold starting. Activate
the choke by moving the choke lever to
the FULL CHOKE position. After the en-
gine attempts to start, move the choke
lever to the HALF CHOKE position. Once
engine has started, move the choke le-
ver to the OFF CHOKE position.
BEFORE STARTING ENGINE
_,WARNING: Be sure to read
the fuel information in the safety rules
before you begin. If you do not
understand the safety rules, do not
attempt to fuel your unit. Call
1-800-235-5878.
FUELING ENGINE
_,WARNING: Remove fuel cap
slowly when refueling.
This engine is certified to operate on
unleaded gasoline. Before operation,
gasoline must be mixed with a good
quality synthetic 2-cycle air-cooled
engine oil. We recommend
Craftsman _R_ brand synthetic oil. Mix
gasoline and oil at a ratio of 40:1. A
40:1 ratio is obtained by mixing 3.2
ounces of oil with 1 gallon of unleaded
gasoline. Included with this trimmer is
a 3.2 ounce container of oil. Pour the
entire contents of this container into 1
gallon of gasoline to achieve the
proper fuel mixture. DO NOT USE
automotive oil or boat oil. These oils will
cause engine damage. When mixing
fuel, follow instructions printed on
container.
Once oil is added to gasoline, shake
container momentarily to assure that
the fuel is thoroughly mixed. Always
read and follow the safety rules
relating to fuel before fueling your unit.
IMPORTANT
Experience indicates that alcohol
blended fuels (called gasohol or using
ethanol or methanol) can attract tools-
5