Craftsman 315.114050 Operator's Manual page 7

Chuck 3/8
In. Key'less MaximumTorque
Motor DC 9.6 Volt CHARGER
Gear Train One Speed
Switch Vadable Speed Rating
No Load Speed O-600/min Charge Rate
Clutch
BATTERY PACK Item No. J11074
(976965-001)
90 In.lb.
Item No, =11070
(976790-001)
120 V, 60 Hz,AC only
3-6 Hour
6 Positions
instructions
Yourdrillhas been shippedcompletelyassembled.
• Carefullyremove the tool and accessehes from the
box.
• Make sure that all Items listed In the pecking listare
Included.
m Inspectthe tool carefullyto make sure no breakage or
damage ocouredduring shipping,
= Donot discard the p=_cldng m aterial untilyou have
carefully Inspected and satisfactorily operated the tool.
• If any perts are damaged or missing,please call
1-800-932o3188.
Pacldng List
DHII
Battery Pack
Charger
Double-anded ScrewdriverBIt (2)
40 pce BIt Set
Carry Bag
Operator's Manual
_WARNING: If any parts are missing do not operate
yourtoof untilthe missingparts are replaced. Failure
to do so could resulttn possibleserious Injury.
J_ WARNING: The ddll shouldnever be connected to a
power supplywhen you are assemblingparts, making
adjustments,cleaning, performingmaintenance, or
when the tool Is not In use, Dlsoonnectlng the tool will
preventacctdentaistartingthat could cause sedous
Injury.
KNOW YOUR DRILL-DRIVER
See Figure 1.
Before altemlXIng to use your drill-driver,farnllladze
yourself with all operating features and safety
requirements.
KEYLESS CHUCK
Yourdrill-driver has a keyles#chuck that allowsyou to hand
tightenor releasedrillbit Inthe chuck Jaws.
SWITCH
To turnyour ddll-ddverON, depressthe switchtdgger.
Release switch tdgger to turnyour ddU-ddver OFF.
SWITCH LOCK
The switch tdgger can be lockedin the OFF position.This
feature helps reduce the possibilityof ,_ccldentaist-rtTng
when not In use,
VARIABLE SPEED
This tool has a varlab{e speed switch that delivers higher
speed with Increased tdgger pressure.Speed Is contmnod
by the amount of switch tdgger depression.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your ddn-ddverhas a forward/reverseselector locked
above the switchtrigger,
WRIST STRAP
A wrist strap Is providedto reducethe chances of drepplng
your drill-driver. P lace one hand through the wdst strap
when carryingtool.
BIT STORAGE
When not in use, bit(s) providedwith your drill-drivercan
be placed In the storage area located on the top of the
motor housing.
A WARNING: Ifany parts am missing,do notoperate
yourdrill-driver until the missing parts are replaced.
Failureto do socould resultIn possibleserious
personal injury.