Need More Help - Craftsman 917.371624 Owner's Manual

Rotary lawn mower 625 series briggs & stratton engine power-propelled 22" multi-cut
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
- See appropriate
section in manual unless directed
to a Sears Parts & Repair Center.
CAUSE
PROBLEM
Loss of power
Poor cut =
i uneven
Excessive
vibration
Starter rope
hard to pull
Grass catcher
not filling
(if so equipped)
Hard to push
i Loss of drive
or slowing of
idrive speed
1.
Rear of mower
housing
or
blade dragging
in grass.
2.
Cutting
too much
grass.
3.
Dirty air filter.
4.
Buildup
of grass,
leaves,
and trash under
mower.
5.
Too much
oil in engine.
6.
Walking
speed
too fast.
1.
Worn,
bent or loose
blade.
2.
Wheel
heights
uneven.
3.
Buildup
of grass,
leaves
and trash under
mower.
1.
Worn,
bent or loose
blade.
2.
Bent engine
crankshaft.
.
.
3.
4.
Engine flywheel brake is on
when control bar is released.
Bent engine
crankshaft.
Blade adapter broken.
Blade dragging
in grass.
1. Cutting height too low.
2. Lift on blade worn off.
3. Catcher not venting air.
1.
Grass
is too high or wheel
height
is too low.
2.
Rear of mower
housing
or
blade dragging
in grass.
3.
Grass
catcher
too full.
4.
Handle
height
position
not
right for you.
1.
Belt wear.
2.
Belt off of pulley.
3.
Drive cable
worn
or broken.
4.
"Loose"
drive control
system.
CORRECTION
1. Raise cutting height.
2.
Raise cutting
height.
3.
Clean/replace
air filter.
4.
Clean
underside
of mower
housing.
5.
Check
oil level.
6.
Cut at slower
walking
speed.
1.
Replace
blade.
Tighten
blade
bolt.
2.
Set all wheels
at same
height.
3.
Clean
underside
of
mower
housing.
1.
Replace
blade.
Tighten
blade
bolt.
2.
Contact
a Sears or other
qualified
service
center.
1.
Depress
control
bar to
upper
handle
before
pulling
the starter
rope.
2.
Contact
a Sears or other
qualified
service
center.
3.
Replace
blade
adapter.
4.
Move lawn mower
to cut
grass
or to hard surface.
1.
Raise cutting
height.
2.
Replace
blade.
3.
Clean
grass
catcher.
1.
Raise cutting
height.
2.
Raise rear of mower
housing
one (1) setting
higher.
3.
Empty
grass
catcher.
4.
Adjust
handle
height
to suit.
1. Check/replace
drive
belt.
2.
Check/reinstall
drive
belt.
3.
Replace
drive cable.
4.
Adjust
drive
control.
NEED MORE HELP?
You'll find the answer
and more
on managemyhome,com
= for free!
• Find this and all your other
product
manuals
online.
• Get answers
from
our team of home
experts.
• Get a personalized
maintenance
plan for your
home.
• Find information
and tools to help with home
projects.
18
brought
to you by Sears

Advertisement

Table of Contents
loading

Table of Contents