Volume And Mute Buttons - Lenovo ThinkPad X1 User Manual

Enabling or disabling the wireless features
• Fn+F5
Enable or disable the built-in wireless networking features. In the Windows 7 operating system, if you
press Fn+F5, a list of wireless features is displayed. You can quickly change the power state of each
feature in the list.
If you want to use Fn+F5 to enable or disable the wireless features, the following device drivers must be
installed on your computer beforehand:
– Power Management driver
– OnScreen Display Utility
– Wireless device drivers
In Instant Media mode, if you press Fn+F5, the WiFi settings interface will be displayed. You can set the
WiFi credentials and other wireless connection parameters in the WiFi settings interface.
For information on the wireless features, refer to "Wireless connections" on page 38.
Launching the camera and audio settings
• Fn+F6
If you press Fn+F6, the camera and audio settings window is displayed and the camera preview is
turned on.
From this window, you can change the camera and audio settings.
Note: The camera settings area only appears if your computer has an integrated camera. For more
information, see "Using an integrated camera" on page 48.
Multimedia control
• Fn+F10: Previous track/scene
• Fn+F11: Play or pause
• Fn+F12: Next track/scene
Other functions
• Fn+Spacebar: Your computer has a backlit keyboard. This combination is used to control the keyboard
backlight.
There are three states for the keyboard backlight: On (Low), On (High), and Off.
Press Fn+Spacebar once to turn on the keyboard backlight in low brightness level. To adjust the backlight
to a high brightness level, press the key combination again. Pressing the key combination for a third
time turns off the keyboard backlight.
• Fn+F8: The computer display becomes dimmer.
The purpose of this method is to change the brightness level temporarily. To change the default brightness
level, change the settings of the Power Option in Control Panel or use Power Manager.
• Fn+F9: The computer display becomes brighter.
The purpose of this method is to change the brightness level temporarily. To change the default brightness
level, change the settings of the Power Option inControl Panel or use Power Manager.

Volume and mute buttons

You can adjust the sound level of the built-in speakers by using the following three buttons:
28
User Guide