Escort EA-CR User Manual page 15

ChartReader Specifications
Internal Power Source
Charge time
Operating time from one charge
External Charge Source
Typical Read time
Printer type
Printout graph size
Printout Speed (typical)
Memory
Upgrade possible to support
new product ?
©
Escort Data Logging Systems LTD
USER GUIDE
: 7.2V NiCad Battery
: typically 1 hour to complete 90% charge
: typically 1 hour of continuous graph printing
: 12 - 15 volts @ 1 AMP with a 2.1mm DC
plug (centre negative), supplied either via
suitable mains adapter or vehicle lighter
adapter. Adapters of lesser current rating will
cause longer charge times or incomplete
charging.
: 25 secs for 2000 logs, 45 secs for 4000 logs
: Epson M190 impact (dot matrix) printer.
: Paper size : 57 mm
Y range : 46 mm
(1.7ºC / mm @ full scale -40 to 40ºC)
X range : 37mm / 100 logs
: 3.5 lines per second
Graphing: approximately 4000 logs per 3
minutes, longer for EJ-HS loggers
depending on data.
: EJ-CR, EJ-CR-16:
EJ-CR-II, EJ-CR-MEM,
EA-CR:
therefore approximately:- 500 2K loggers or
MN-CR:
MN-CR-MEM:
therefore approximately 500 MINI loggers.
EI-CR-MEM:
therefore approximately 162 iLog loggers.
: Yes, via ESCORT user software; please
contact your distributor.
DATED: 03/07/07
16,000 readings
(one logger data
set)
1,000,000 bytes,
- 250 4K loggers or
- 125 8K loggers or
- 25 40K loggers.
2,000 readings
(one logger data set)
1,000,000 bytes,
1,000,000 bytes,
PAGE 15