Date/Time Menu; Security Menu - Lenovo ThinkPad Edge L330 User Manual

Table 4. Config menu items (continued)
Menu item
Serial ATA (SATA)
CPU

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change-date or time.
2. Press Tab, Shift Tab, or Enter to select a field.
3. Type the date or time.
Note: Another way to adjust the date and time is to press the "-" or "+" key.

Security menu

If you need to set the security features of your computer, select Security from the ThinkPad Setup menu.
Notes:
• Default values are in boldface.
• On each submenu, press the Enter key to show selectable options and select a desired option by using
the cursor keys.
• Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Security menu items
Menu item
Password
Submenu item
SATA Controller Mode
Option
Core Multi-Processing
Intel Hyper-Threading
Technology
Submenu item
Supervisor Password
Lock UEFI BIOS Settings
Selection
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Selection
• Disabled
• Enabled
• Disabled
• Enabled
Chapter 6
Comments
Selects SATA controller
operation mode.
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
Enable or disable additional
logical processors within a
processor core.
Comments
Refer to "Supervisor
password" on page 44.
Enables or disables the
function that protects items
in ThinkPad Setup program
from being changed by a
user who does not have
the supervisor password.
By default, this is set to
.
Advanced configuration
63