HP XP1024 System Configuration Manual page 34

9.
Enter values for the following fields:
SIZE of file system (in 512-byte blocks). Enter the lsvg command to display the
number of free physical partitions and physical partition size. Calculate the
maximum size of the file system as follows: (FREE PPs - 1) x (PP SIZE) x 2048
Mount Point: Enter mount point name. (Make a list of the mount point names for
reference.)
Mount AUTOMATICALLY at system restart? Enter yes.
CAUTION:
In high availability systems (HACMP and/or HAGEO), enter no.
Number of bytes per node. Enter the number of bytes appropriate for the
application, or use the default value.
Example
Add a Journaled File System
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
10. Press Enter to create the Journaled File System.
The Command Status screen appears.
Wait for OK to appear on the Command Status line.
11.
To continue creating Journaled File Systems, press the F3 screen. key until you
return to the Add a Journaled File System screen. Repeat steps 2 through 10 for
each Journaled File System to be created.
12.
To exit SMIT, press the F10 key.
34
Installation
Volume group name
SIZE of file system (in 512-byte blocks)
MOUNT POINT
Mount AUTOMATICALLY at system restart?
PERMISSIONS
Mount OPTIONS
Start Disk Accounting?
Fragment Size (bytes)
Number of bytes per inode
Compression algorithm
Allocation Group Size (Mbytes)
vg01
[4792320]
[VG01]
no
read/write
[]
no
4096
4096
no
*1