HP Surestore Disk Array 12h - And FC60 User Manual page 163

¤
Option Status Information Displayed
none General array information. This includes disk capacity usage.
Sample output is shown in
-l [LUN] LUN status. Status for all LUNs on the disk array will be displayed,
unless a specific LUN is specified using the LUN option. If UTM is
enabled, it will be displayed in the LUN output.
-g Disk group status.
-d Disk status. Complete information will be displayed for each disk in
the disk array.
-c Controller status. Information is displayed for both disk array
controllers and for all disk system BCC modules.
-s Array status. Information about the entire array is displayed.
-h Hardware status. Information is displayed for all disk array hardware
components, including fans and power supplies.
.
163