Brocade Communications Systems StoreFabric SN6500B Installation Manual page 74

3
Migrating data
13. (IP Enterprise) Select one of the following options on the IP Network Size screen and click Next:
14. Enable feature usage data transfer from the application by selecting the Yes, I want to
15. Verify your configuration information on the Server Configuration Summary screen and click
16. Complete the following steps on the Start Server screen.
17. Enter your user name and password.
18. Click Login.
19. Click OK on the Network Advisor Login Banner.
54
NOTE
Port count is equal to the total number of all managed product ports.
NOTE
If you installed the SAN with SMI Agent + IP package on a 32-bit Windows system, the Large
option is disabled for IP Network Size (Enterprise and Professional Plus).
•
Small (managing up to 1-20 products)
•
Medium (managing up to 21-200 products)
•
Large (managing up to 201-5050 products)
participate option.
You can stop participating at any time. To view an example of the usage data, click View
Example Data.
To stop participating in feature usage data transfer after configuration, refer to
Improvement" on page 37.
Next.
a. (Trial and Licensed only) Select the Start SMI Agent check box, if necessary.
b. (Trial and Licensed only) Select the Start SLP check box, if necessary.
c. Select the Start Client check box, if necessary.
d. Click Finish.
After all of the services are started, the Log In dialog box displays.
To make changes to the configuration, you can re-launch the configuration wizard (refer to
"Configuring an explicit server IP address"
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your user name and password do not change.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
on page 36).
Network Advisor Installation and Migration Guide
"Product
53-1002699-01