Table 12 Configuration Options For Thconfig Command - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

TABLE 12
Class name
Fabric
Security
SFP
Filter
EE (End-to-end
performance)
1
To change the default, provide an integer value.
2
Valid custom action setting values include SNMP, RASlog, portlog, e-mail, or none.
Fabric Watch Administrator's Guide
53-1002752-01
Configuration options for thConfig command
Valid area types
ED - Number of E_Ports
down
FC - Fabric reconfiguration
DC - Domain ID changes
SC - Segmentation changes
ZC - Zone changes
FL - Fabric logins
TV - Telnet violations
HV - HTTP violations
SV - Serial violations
DV - DCC violations
IC - Invalid certifications
LV - Login violations
TS - TS out-of-sync
FF - SLAP failures
NF - No FCS
ISB - Incompatible security
IV - Illegal command
TXP - Transmit areas
RXP - Receive areas
Current
Voltage
Temperature
PWROnHours
CUSTDEF
RXF - Receive areas
TXP - Transmit areas
thConfig command
Threshold Threshold Configuration recommendation
action
Default or Default or It is recommended that you leave the
1 2
Custom Custom entire Fabric class in its default state
(no alerts).
See "Fabric monitoring setting
guidelines"
information.
Default or Default or Use the Security class default settings
1 2
Custom Custom for areas and alarm configuration.
There is no reason to alter the default
settings.
Default or
Default or Use the SFP default settings. The
1 2
Custom Custom traits are SFP-specific and there is no
reason to alter them. See
monitoring default settings"
page 44 for more information.
Default or Default or Use the Filter default settings.
1 2
Custom Custom
Default or Default or It is recommended that you leave the
1 2
Custom Custom entire Performance Monitor Class and
End-to-End Performance Monitor
Class area settings in their default
state (no alerts).
6
on page 38 for more
"SFP
on
47