Fru Profiles; Registration; Data Model - Brocade Communications Systems StoreFabric SN6500B Developer's Manual
Brocade network advisor smi agent developer's guide v12.0.0 (53-1002701-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
•
•
•
•
FRU profiles
The Fan, Power Supply, and Sensors (FRU) profiles model discovery of a switch's field-replaceable
units (FRUs).
Registration
Refer to
Data model
Figure 53
Brocade Network Advisor SMI Agent Developer's Guide
53-1002701-01
AG on Brocade Encryption Switch, where the Brocade Encryption Switch AG is the Seed switch.
The loop devices are not supported when attached to AG.
The value of LLDP-DCBX for AG port if AG is not available in Brocade Network Advisor.
-
The SMI Agent populates this property as "Unknown" in Brocade_EthernetAccessGateway
if the instance is retrieved through enumerateInstances.
-
The correct value of this property can obtained through the getInstance() intrinsic
operation only.
The Ethernet switch instance is not delivered if Ethernet switch is discovered through IP Tab
alone.
Figure 53
for profile registration details.
shows the data model with the classes and properties that supports the FRU subprofiles.
3
FRU profiles
101
Advertisement
Table of Contents
