Fwportdetailshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

fwPortDetailShow

fwPortDetailShow
Displays the port information for specified user ports.
SYNOPSIS
fwportdetailshow [--p port] | [--s portState]
DESCRIPTION
Use this command to print the overall status of a specified port. The output of this command is different
for IPv4 and IPv6 addresses. The overall status is calculated based on the following contributors:
Port Errors
LFA
LSY
LSI
PER
INW
CRC
PSC
BLP
SFP Errors
STM
SRX
STX
SCU
SVO
Overall status
Healthy
Marginal
Faulty
Offline
If the overall status is not healthy, the contributing factors also are listed.
420
The number of link loss occurrences exceeding the limit for the time period.
The number of sync loss occurrences exceeding the limit for the time period.
The number of signal loss occurrences exceeding the limit for the time period.
The number of protocol errors exceeding the limit for the time period
The number of invalid words exceeding the limit for the time period
The number of invalid CRC errors exceeding the limit for the time period
The port hardware state changed too often.
Buffer limited port
The SFP temperature is out of range.
The SFP receive power is out of range.
The SFP transmit power is out of range.
The SFP current is out of range.
The SFP voltage is out of range.
Every contributor is healthy.
One or more contributors are in this status.
Faulty hardware.
The port has no connectivity or is disabled.
Fabric OS Command Reference
53-1002746-01