System Installation And Recovery Process; Documentation Updates - HP StorageWorks X5000 Release Note

System installation and recovery process

This section describes issues related to installing the operating system on a storage server or performing
the recovery process.
Issue:
After performing installation or recovery, the machine boots again to the System Installation and
Recovery menu rather than the Windows logon screen
Description
Workaround Remove the DVD and reboot the machine.
Issue:
After restoring the system with the System Installation and Recovery DVD, the data drive may be
seen by Windows as a foreign disk
Description
Workaround Open the Disk Management snap-in. Right-click on the foreign disk and select
Issue:
NfsSvr logs an error in the event log
Description
Workaround This error does not affect the performance of NFS. The issue will be resolved in a

Documentation updates

This section describes issues related to documentation for the storage servers.
Issue:
Incorrect note about User Name Mapping component in Windows Storage Server 2003 R2
administration guide
System installation and recovery process
If the recovery DVD is left in the drive of an ML310 G3 storage server, the system
will boot again from the DVD, even though the installation or recovery process
is complete.
If the data drive was a dynamic disk prior to performing a system recovery, the
disk may be designated as a foreign disk by Windows after the recovery. This
issue is seen in the Disk Management MMC snap-in.
Import disk.
On systems with Windows Storage Server 2003 R2, the event log may contain an
error stating that Server for NFS failed to initialize on a non-existent drive letter.
For example:
Event Type: ErrorEvent
Source: NfsSvr
Event Category: None
Event ID: 1066
Description: Server for NFS failed to initialize
on volume with drive letter F:
later HP ProLiant Storage Server release.
Documentation updates
Storage Server with Windows Storage Server 2003 R2 release notes
21