Replacing A Photoconductor - Lexmark X940e Quick Reference

9
Insert the new waste toner box.
10
Place the new printhead lens cleaner in the notches of Door E.
11
Close Door E6.
12
Close Door E.
13
Remove all paper from the printer paper path.
Visit www.lexmark.com/recycling to learn how to recycle the
waste toner box.

Replacing a photoconductor

Replace the black photoconductor when 84 Replace black
pc unit appears. Replace the cyan, magenta, and yellow
9
photoconductors when 84 Replace color pc units
appears.
1
Open Door E (front printer door).
Warning—Potential Damage: To avoid overexposing the
photoconductors, do not leave the door open for more than
10 minutes.
2
Release the bar by pressing the E5 button located on the
bottom of the E5 latch, lift the E5 latch, and then press the bar
down.
3
Remove the photoconductor(s) specified on the display.
Photoconductor color Opening name
Black E1
Cyan E2
Magenta E3
Yellow E4