Interpreting Isl Trunking Error Messages; Warning Bloom-Trnk_Mstr_Dwn; Warning Bloom-Trnk_Slv_Dwn - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Interpreting ISL Trunking Error Messages

The only two error messages that relate to ISL Trunking are described below. The
error log can be accessed through the errshow and errdump commands.

Warning BLOOM-TRNK_MSTR_DWN...

This type of message indicates that the Master ISL has been disconnected or has
failed.
Example.
In this example,
If this error displays, the following actions are recommended:

Warning BLOOM-TRNK_SLV_DWN...

This type of message indicates that the Subordinate ISL has been disconnected or
has failed.
Example.
In this example,
ISL Trunking Version 3.1.x/4.1.x User Guide
Warning BLOOM-TRNK_MSTR_DWN, 3, S3, P47: Trunk master port 47
goes OFFLINE in trunk group [47 46]
3 indicates the severity level of the error
(where 0 = panic, 1 = critical, 2 = error, 3 = warning, 4 = info, and 5 = debug).
S3 indicates the slot number
port 47 indicates the area number of the Master Port
[47 46] indicates the ports that are participating in the trunking group
Determine whether the Master ISL has been physically disconnected.
If the Master ISL has not been disconnected, enter the portlogdump and
fabstateshow commands, save the output, and contact Technical Support
for assistance.
Warning BLOOM-TRNK_SLV_DWN, 3, S3, P46: Trunk slave port 46
goes OFFLINE in trunk group [47 46]
3 indicates the severity level of the error
(where 0 = panic, 1 = critical, 2 = error, 3 = warning, 4 = info, and 5 = debug).
S3 indicates the slot number
Managing ISL Trunking
43