Reading Text Messages - Ericsson T18di User Manual

• Saved ( ) - The text message has been read and saved.
Existing saved text messages will not be overwritten by a new
message. If your phone's text message memory is full, the text
message icon ( ) will flash. You must delete one or more
saved messages before your phone can receive a new text
message.

Reading Text Messages

Reading a Text Message Immediately Upon
Receipt
When a text message is received by your phone, one or more tones
sound, and a message appears in the display that notifies you that an
emergency, urgent, or normal message has been received.
To read the text message:
1 Press YES to read the message, or press
The message is skipped and is kept as an unread message. It can
be reviewed later.
2 Display the message line by line by pressing ë or î .
3 Display the message three lines at a time by pressing and holding
ë or î .
Reading Text Messages During a Call
When you receive a message during a call, your phone sounds a brief
tone and a message appears in the display prompting you to read the
text message (the ability to receive a text message during a call is
operator dependent). To read the text message, do one of the
following:
Message Services
NO to skip the message.
• Press YES to display the incoming message
• Press to continue talking and have the message treated as an
NO
unread message (
Note! You cannot receive messages during a call if the text message mem-
ory is full.
Reading Unread Text Messages
If you have messages that you have not read, a number and the text
message icon appear in the display.
To read the text messages:
1 Press ë or î from the Standby screen to access the main menu.
2 Press ë or î until the MESSAGES menu is highlighted.
to open the MESSAGES menu.
3 Press YES
4 Press ë or î until the Messages submenu is highlighted.
to open the Messages submenu.
5 Press
YES
6 Press ë or î until the new message is highlighted.
7 Press to open the message. Once the message is open, you can
YES
scroll through the message one line at a time by pressing ë or î .
You can also scroll up or down through the message three lines at a
time by pressing and holding ë or î .
Saving and Deleting Text Messages
After you have retrieved and read a text message, you can do the
following:
• To save the text message to memory, press and hold
message status is set to saved (
• To delete the message, press and hold
deleted.
).
YES
).
CLR . The message will be
. The
53