Disc Changer - Honda Pilot Owner's Manual

2008
Hide thumbs Also See for Pilot:
Table of Contents

Advertisement

Main Menu
To Play a CD
To load or play CDs, the ignition
switch must be in the ACCESSORY
(I) or the ON(II) position.
You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a CD
until you change modes.
To select a different disc, press the
appropriate preset button (1 6). On
models with navigation system,
touch the appropriate disc icon. If
you select an empty position in the
CD changer, the system will go into
the loading sequence.
Table Of Contents
LX models
Insert a CD about halfway into the
CD slot. The drive will pull the CD in
the rest of the way and begin to play
it. When the system reaches the end
of the disc, it will return to the
beginning and play the disc again.
You cannot load and play 3-inch
(8-cm) discs in this system.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
To play the radio when a CD is
playing, press the AM/FM button
(AM or FM button). Press the CD
button again to switch back to the
CD player.
2008 Pilot
Playing a Disc, Disc Changer
On models with Satellite Radio
To listen to satellite radio when a CD
is playing, press the AUX/XM or XM
button.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
131

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 pilot

Table of Contents