Table of Contents
Advertisement
Restoring
pr÷vious
s÷Hings
Some of the settings that you can change in the camera menus
do not remain set after you turn the camera off. However, you
can restore the settings from the last time the camera was on
and had at least one non-default setting (which could actually
be several power cycles ago) by holding down the OK button
while also sliding the _ ON/OFF switch to turn the camera on.
The restored settings are then displayed across the top of the
status screen. (See the previous section.)
Choosing the anguag÷
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
Scrollto the language that you
want by usingthe A
v
buttons
on theControlbr ',_.
2 Press theOK button to selectthe
highlightedlanguage.
S÷tting
th÷
date
and
time
The camera has a clock that records the date and time at which
you take each picture. The first time you turn the camera on, the
following screen appears after you choose the language.
I Adjust the valueof the
highlightedselectionby
usingthe A v
buttons.
2 Press the _ _ buttonsto moveto
theother selections.
18
hp photosmart 930 series user's manual
Advertisement
Table of Contents
