ATTACHING
THE STRAP
AND LENS CAP
Pass the lens cap string through
the hole in the lens cap.
Fasten the strap to the strap
eyelet as shown in the diagram.
Adjust the strap to the desired
length. Pull the strap through
the stopper ((_)
and make sure
it is fastened securely.
Attach the strap to the other
eyelet in the same way.
Strap eyelet
LOADING
THE BATTERIES
1
2
Make sure the power switch is set to OFF.
Slide the battery compartment
lock from G to 6.
Place your finger
on the ,i,llu,_
mark and slide the battery
compartment
cover in the
direction of (_), then lift in the
direction of (_.
• Use the bali of your finger to slide the
cover Do not use your fingernail as this
could result in injury.
..... " .... I
/
En 13