Table of Contents
Advertisement
On Timer Button
Press the ON TIMER button to view status of the On Timer Menu. This menu may be programmed for any desired
turn on time and channel within a 24 hour period.
2:45 PM
IMPORTANT NOTE: CLOCK MUST FIRST BE SET BEFORE THIS FEATURE CAN
BE USED. Clock setting can be confirmed when the time display appears on screen
(luring initial turn on or channel change.
To Program
On Timer Menu:
1.
Press the ON TIMER button to display On Timer Menu.
.
ON TIME
CH 05
2.
Press the ON TIMER button repeatedly to advance cursor (--_) to ON TIME hours
position and it will display in Red. Use LEVEL (+) or (-) button to set hours AM or
PM.
.
3.
Press the ON TIMER button to advance to MINUTES position and it willdisplay in
Red. Set minutes with the use of LEVEL (+) or (-) button.
.
[ ON TIME "-_'AM 10:15 I
CH 05
SET NO I
,
Press the ON TIMER button to advance cursor to CH position and it will display in
Red. Press LEVEL (+) or (-) button until the desired channel number is displayed.
(Only channels programmed into Channel Memory are available.)
I
TIME
AM 10:15
I-o'CH
05
SETNO I
.
Press the ON TIMER button to advance cursor to SET position. Each press of
LEVEL (+) or (-) button selects YES or NO. Select YES if you want to activate the
ON TIMER feature (On Timer indicator will light). Select NO if you do not want to
activate the ON TIMER feature.
Special Conditions Affecting On Timer
•
The ON TIMER feature must be reset each time it is desired.
•
After initial turn ON by the ON TIMER feature, turn OFF will automatically occur in 90 minutes unless any button.
is pressed.
•
Turn ON prior to ON TIMER feature activation will cause the channel designated by the On Timer Menu to be
tuned at the programmed time.
-10-
Advertisement
Table of Contents
