Cart Tray - Craftsman 486.24707 Operator's Manual

Assemble a naxleclip, a wheel a nda 5/8"washer o nto
eachendoftheaxle. A ssemble a second 5/8"washer
ontoeachendoftheaxleifspace allows. Secure both
wheels inplaceusing twocotterpins. S eefigure 4.
FLAT
WASHER
WHEEL
\
AXLE
FIGURE 4
Assemble the latch stand plate and latch stand
bracket (with alignment tab toward rear of cart) to the
cart tray using four 1/4" x 3/4" hex bolts, 1/4" washers
and 1/4" nylock nuts. Tighten nuts after all bolts are in
place. See figure 5.
Place the cart bed braces and the cart tray onto
the wheel support. Secure latch stand bracket
underneath the tongue's latch lock lever. See figure 6.
Assemble the cart tray and cart bed braces to the
wheel support using eight 5/16" truss head bolts and
5/16" nylock nuts. Tighten nuts after all bolts are in
place. See figure 6.
5/16"TRUSS
HEAD BOLT
/
CART I
BED
BRACE
FIGURE 6
114"x 314"
HEX BOLTS
I_"NYLOCK NUT
FIGURE 5
10
Cal11-866-576-8388formissingpartsorassemblyhelp
DO NOT RETURN TO STORE