Craftsman 917.28914 Operator's Manual
Craftsman 917.28914 Operator's Manual

Craftsman 917.28914 Operator's Manual

21.0 hp 46" mower electric start automatic transmission
Hide thumbs Also See for 917.28914:

Advertisement

Available languages

Available languages

Quick Links

Operator's
Manual
CRRFTSMRH °
LAWN TRACTO
21.0 HR* 46" Mower
Electric Start
Automatic
Transmission
Model No.
917.28914
• EspaSol, p. 33
03131
This product has a low emission
engine which operates
differently
from
previously
built
engines.
Before
you start the
engine, read and understand
this Owner's
Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions
before
operating
this equipment.
For answers to your questions
about this product, Call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pro, Mon- Sat
SEARS,
ROEBUCK
AND CO., HOFFMAN
ESTATES, IL 60179
U.S.A.
Visit our Craftsman website:www.sears.com/craftsman
*As rated by the engine manufacturer
434613 Rev. 1

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 917.28914

  • Page 1 IMPORTANT: For answers to your questions about this product, Call: Read and follow all Safety 1-800-659-5917 Rules and Instructions before Sears Craftsman Help Line operating this equipment. 5 am - 5 pro, Mon- Sat SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 U.S.A.
  • Page 2 1-800-659-5917 to arrange for free in-home repair. The frame and front axle will be repaired free of charge for five years from the date of purchase if defective in material or workmanship.
  • Page 3 _IkDANGER: This cutting machine is capable of amputating hands feet throwing objects. Failure to observe the following safety instructions could result in serious injury or death. I_IIWARNING: In order to prevent acciden- • Never direct discharged materialtoward tal starting when setting up, transporting, anyone.
  • Page 4: Slope Operation

    Ii. SLOPE OPERATION • Never carry children, even with the blades shut off. They may fall off and Slopes are a major factor related to loss of be seriously injured or interfere with control and tip-over accidents, which safe machine operation.
  • Page 5: General Service

    • Remove gas-powered equipment from • Keep machine free of grass, leaves, the truck or trailer refuel it on the other debris build-up. Clean oil or fuel ground. If this is not possible, then refuel spillage and remove any fuel-soaked such equipment with a portable container,...
  • Page 6 AGREEMENTS Gasoline Capacity 3 Gallons Congratulations on making a smart purchase. and Type: Unleaded Regular Your new Craftsman® product is designed Oil Type SAE 30 (above 32°F) and manufactured for years of dependable APFSG-SL): SAE 5W30 (below 32°F ' operation.
  • Page 7 Keys Slope Sheet (2) Keys Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY z -Z...." A socket wrench set will make assembly Label easier. Standard wrench sizes...
  • Page 8 NOTE: You may now roll your tractor off _CHECKLIST the skid. Follow the appropriate instruction below to removethe tractor from the skid. Beforeyou operate your new tractor, we wish to ensure that you receive the best performance _iLWARNING: Before starting, read, and satisfaction from this...
  • Page 9 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH 45 @ ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT OPERATION SYSTEM...
  • Page 10 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03078 Our tractors conform to the applicable safety...
  • Page 11 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 12 TO MOVE FORWARD TO ADJUST GAUGE WHEELS BACKWARD Gauge wheels are properly adjusted when they are slightly off the ground when mower The direction and speed of movement is at the desired cutting height in operating controlled by the motion control lever. (J) position.
  • Page 13: To Operate On Hills

    IMPORTANT: The motion control lever does REVERSE OPERATION SYSTEM (ROS) not return to neutral position when the clutch/ Your tractor is equipped with a Reverse brake pedal is depressed. Operation System (ROS), attempt • To restart movement, slowly release park- the operator to travel in the reverse direction...
  • Page 14: Before Starting

    BEFORE STARTING THE ENGINE Place motion control lever in neutral position. CHECK ENGINE OiL LEVEL Move attachment clutch to disengaged The engine in your tractor has been shipped, position. from the factory, already filled with summer Move throttle control to choke position.
  • Page 15: Mowing Tips

    MOWING TiPS PURGE TRANSMiSSiON • Tire chains cannot be used when the ,_IbCAUTION: Never engage or disengage mower housing is attached to tractor. freewheel lever while the engine is running. • Mower should be properly leveled for best To ensure proper operation and performance, mowing performance.
  • Page 16: General Recommendations

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS _,,=.,=.,=.,=.,=.,=,-- _ V" Check Brake Operation v" Check Tire Pressure v" Check Operator Presence & ROS Systems =,,,, Check for Loose Fasteners ChecWReplace Mower Blades v"...
  • Page 17: Operation

    TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when performing any maintenance. • When the engine is running with the ignition BRAKE OPERATION switch in the engine "ON" position and the attachment clutch engaged, any attempt If tractor requires more than five (5) feet to...
  • Page 18: Engine Oil

    BATTERY NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, Your tractor has a battery charging system they will result in increased oil consumption which is sufficient for normal use. However, when used above 32°R Check your engine periodic charging of the battery...
  • Page 19 ENGINE COOLING SYSTEM ENGINE OIL FILTER Replace the engine oil filter every season or Debris may clog the engine's air cooling every other oil change if the tractor is used system. Remove blower housing and clean more than 100 hours in one year. area shown to prevent overheating...
  • Page 20 CLEANING • Clean engine, battery, seat, finish, etc. Nozzle of all foreign matter. Washout Port • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. CAUTION: Avoid all pinch points movable parts Clutch/brake...
  • Page 21 WARNING: SERVICE OR ADJUSTMENTS: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral position. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely stopped.
  • Page 22 ATTACH MOWER SIDE SUSPENSION Insert end of link (E) into hole in front ARMS (A) TO CHASSIS - Position hole mower bracket secure with in arm over pin (B) on outside of tractor washer and retainer spring (J). chassis and secure with retainer spring.
  • Page 23 TO LEVEL MOWER If adjustment is necessary, see steps Make sure tires are properly inflated to the and 3 in Visual Adjustment instructions PSI shown on tires. Iftires are over or under above. inflated, it may affect the appearance of your Recheck measurements, adjust if neces-...
  • Page 24: Motion Drive Belt

    TO REPLACE MOWER BLADE DRIVE BELT Pull belt toward front of tractor and roll belt onto engine pulley (E). The mower blade drive belt may be replaced without tools. Park the tractor on level sur- Pull belt toward rear of tractor. Carefully work belt...
  • Page 25: Maintenance

    TO REMOVE WHEEL FOR REPAIRS NOTE: If additional clearance is needed get to adjustment bolt, move mower deck Block up axle securely. height to the lowest position. Remove axle cover, retaining ring and After above adjustment is made, if the trac- washers to allow wheel...
  • Page 26: Interlocks And Relays

    REPLACING BATTERY TO REPLACE FUSE Replace with 20 amp automotive-type WARNING: Do not short battery termi- plug-in fuse. The fuse holder is located nals by allowing a wrench or any other object behind the dash. to contact both terminals at the same time. TO REMOVE HOOD &...
  • Page 27 ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will FUEL SYSTEM not be used for 30 days or more. IMPORTANT: It is important to prevent _IbWARNING: Never store the tractor with gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, gasoline in the tank inside a building where...
  • Page 28: Troubleshooting

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Fill fuel tank. Will not start Out of fuel. See "TO START ENGINE" in Engine not "CHOKED" properly. Operation section. Wait several minutes before Engineflooded.
  • Page 29 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Engine clicks but Weak or dead battery. Recharge or replace battery. will not start Corroded battery terminals. Clean battery terminals. Loose or damaged wiring. Check all wiring.
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE PROBLEM CORRECTION Poor cut - uneven Worn, bent or loose blade. Replace blade. Tighten blade bolt. cutting Mower deck not level. Level mower deck. Buildup of grass, leaves, and Clean underside of mower trash under mower.
  • Page 31: Need More Help

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Battery will not Bad battery cell(s). Replace battery. charge Poor cable connections. Check/clean all connections. Faulty regulator (if so equipped). Replace regulator. Faulty alternator. Replace alternator.
  • Page 32 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow ARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees.
  • Page 33 Si alguna de las partes de desgaste de este equipo tractor falla debido a un defecto de material o mano de obra DENTRO DE LOS DOS ANOS posteriores a la fecha de compra, visite www.craftsman. corn o Ilame al 1-800-659-5917 para solicitar la reparaci6n gratuita en nuestras instalaciones.
  • Page 34 _PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. No maneje la maquina si no tiene la trampa _DVERTENCIA: Siempre desconecte el alam- para c6sped completa, la canaleta de descarga...
  • Page 35 , Escogeruna velocidadde marchabaja de Nunca permitir que nifios u otras personas modoquenoseanecesario pararse o cambiar est6n dentro del equipo por remolcar. estando en unapendiente. En pendientes, el peso del equipo remolcado , Nocortar lahierba mojada. L asruedas pueden puede causar la p6rdida de tracci6n y la p6r- perder tracci6n.
  • Page 36 Mantener la maquina libre de hierba, hojas Las cuchillas del cortacesped son afiladas. u otros residuos acumulados. Limpiar Envolver la cuchilla, ponerse guantes y poner salpicaduras de aceite o carburante y quitar la maxima atenci6n cuando se hacen opera- ciones en elias. cualquier cosa mojada con carburante.
  • Page 37 Capacidad y Tipo 3 Galones Congratulaciones por su buena compra. de gasolina: Regular Sin Plomo Su nuevo producto Craftsman® est& diseSado Tipo de Aceite: SAE 30 (Sobre 32°F/0°C) y fabricado para funcionar de modo fiable por (API-SG-SL) SAE 5W30 (Debajo muchos aSos.
  • Page 38 Hoja de pendiente Liaves Llaves (2) Su tractor nuevo ha sido montado en la f_tbrica con la excepci6n de aquellas partes que no se han montado por razones de envio. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Etiqueta Un juego de Ilaves de tubo facilitar& el montaje. A continuaci6n se enumeran los tamahos de las Ilaves estandar.
  • Page 39 AVlSO: Ahora puede rodar o conducir su tractor tfLISTA DE REVISION fuera de la corredera. Siga las siguientes instruc- Antes de operar y de disfrutar de su tractor nuevo, ciones para remover el tractor de la corredera. le deseamos que reciba el mejor rendimiento y la AI_ADVERTENOIA: Antes de empezar, leer, en- mayor satisfaccion...
  • Page 40 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. MARCHA ATRAS NEUTRO ALTO BAJO ESTRANGU- RAPIDO LENTO LACK)N (@) .@ MOTOR MOTOR MOTOR FRENO DE ALTURA DE LA LEVANTAMIENTO SISTEMA ENCENDIDO ENMARCHA ESTACIONAMIENTO...
  • Page 41 FAMIMARICESE CON SU TRACTOR LEA ESTE MANUAL DEL DUEllO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. 03078 Nuestros tractores cumplen con los estandares de seguridad del...
  • Page 42 La operaci6n de cualquier tractor puede hacer que salten objetos extra_os dentro de sus ojos, Io que puede producir da_os graves en 6stos. Siempre use anteojos SEGURIDAD de seguridad o protecciones para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones.
  • Page 43 PARA MOVERSE HACIA ADELANTE Y HACIA AVISO: Ajuste las ruedas calibradoras con el ATRAS tractor en una superficie nivelada plana. 1. Ajuste la segadora a la altura de corte La direcci6n y la velocidad del movimiento deseada con la manilla de ajuste de al- controladas...
  • Page 44 FUNCIONAMIENTO ATRAS PARA TRANSPORTAR Tutractorestaequipado conel Sistema de Fun- Cuando empuje o arrastre su tractor asegt3rese de cionamiento A tr_s(ROS). C ualquier tentativa del desenganchar la transmisi6n poniendo el control operador d eviajarmarcha atras con de la rueda libre en la posici6n de marcha de rue- el embrague da libre.
  • Page 45 AGREGUE GASOLINA Inserte la Ilave en la ignici6n y gire la Ilave , Llene el estanque de combustible.Llene en el sentido que giran las manillas del reloj hastala parteinferior delcuelloderellenodel a la posici6n de arranque start, y suelte la estanque degasolina. N oIoIlenedemasiado. Ilave tan pronto como arranque el motor.
  • Page 46 PURGAR LA TRANSMISION CONSEJOS PARA SEGAR ,_PRECAUCl6N: Nunca enganche o desen- No se pueden usar las cadenas para las Ilantas ganche la palanca del control de rueda libre cuando la caja de la segadora esta adjunta al cuando el motor esta funcionando. tractor.
  • Page 47: Antes De Cada Uso

    PROGRAMADE ANTES CADA CADA CADA CADA CADA ALMACENAMIENTO MANTENIMIENTO CADA USO TEMPORADA HORAS HORAS HORAS HORAS Revisarlaoperaci6ndelfreno Revisar la presion de las Ilantas Verifiez la commande de presence d'op6rateur et le sistema d ROS Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricaci6n...
  • Page 48 Cuando el motor esta en marcha con el inte- TRACTOR rruptor de Ilave del sistema de funcionamiento Siempre observe las reglas de seguridad cuando de mantenimiento. atras (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cualquier tentativa del OPERACION DEL FRENO operador de viajar marcha atras, NO apagara...
  • Page 49: Enfriamiento D Eltranseje

    3. Enjuaguela bateria con agua corrientey Cambie el aceite despues de 50 horas de oper- s6quela. aci6n o pot Io menos una vez al afio si el tractor 4. Limpie losterminales y losextremos d elcable se utiliza menos 50 horas el afio. de labateria conuncepillo dealambre hasta Revise el nivel del aceite del carter antes de arran- quequeden brillantes.
  • Page 50 FILTRO DE ACEITE DEL MOTOR Limpie el desperdicio y los Rejilla de Aire escombros Cambie el filtro de aceite del motor cada tempo- rada ovez por medio que cambie el aceite, si el tractor se usa mas de 100 horas en un afio. FILTRO DE AIRE Su equipo no funcionarA correctamente...
  • Page 51 Pedal Del Mang Puerto de jEmbrague/Freno ,2 iiii_..,_f Lavado // Limpiar Parte Adaptador de Boquilla // Superior Placa _Ib PREOAUOIO--_: _ PUNTOS DE IMPORTANTE: Tire de la manguera para asegu- ENGANCHE rarse de que la conexi6n esta bien fija. SISTEMADEDIRECClON, SALPICADERO, GUARDABARROS Y SEGADORA...
  • Page 52 _I, ADVERTENCIA:PARA EVITAR LESI(_NES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: Presione el pedal del embrague/freno completamente y aplique el freno de estacionamiento. Ponga la palanca de control de movimiento en la posici6n de neutro. Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED).
  • Page 53 Realice el mismo procedimiento en el otro lado del tractor. Retire el resorte de sujeci6n (K), deslice la FIJE LAS PIEZAS DE PROPULSION POS- abrazadera (L) hasta quitarla, y saque TERIORES (C) - Levante la parte posterior presi6n la guia de la caja (P) hasta que se de la cortadora, ubique la ranura de la pieza salga del soporte.
  • Page 54 PARA NIVELAR LA SEGADORA En caso que sea necesario realizar un ajuste, AsegSrese de que los neum&ticos est6n inflados lea los pasos 2 y 3 de las instrucciones Regulaci6n visual que aparecen mas arriba. a la PSI que se indica en estos. Si estan de- masiado inflados o poco inflados, el cesped no le Vuelva a verificar las medidas y ajuste nueva-...
  • Page 55 PARA CAMBIAR LA CORREA DE IMPULSION MONTAJE DE LA CORREA DE LA CUCHILLA SEGADORA Instale la correa nueva de la parte de atras La correa de impulsi6n de la cuchilla segadora a la parte de adelante del tractor, pasandola se puede cambiar sin herramientas. Estacione el por encima de la placa de direcci6n (F) y del tractor en una superficie...
  • Page 56 IMPRESION / INCLINACION DE LAS RUEDAS AVlSO: En las ruedas traseras solamente: alinee las ranuras en el cubo de la rueda trasera en el DELANTERAS La impresi6n e inclinaci6n de las ruedas delan- eje. Inserte la Ilave cuadrada. Vuelva a colocar las arandelas e inserte el teras de su nuevo tractor vienen asi de fabrica y anillo de retenci6n...
  • Page 57 REEMPLAZAR LA BATERIA PARA CAMBIAR EL FUSIBLE C&mbielo por un fusible tipo enchufable de 30 ,_,ADVERTENCIA: No haga cortocircuito con los amps, tipo automotriz. El sujetador del fusible terminales de la bateria al permitir que una Ilave esta ubicado detras del tablero. de tuerca o cualquier otro objeto entre en contacto con ambos terminales a la misma vez.
  • Page 58 Inmediatamente prepare su tractor para el al- , Vaciar el dep6sito del carburante poniendo en macenamiento al final de la temporada o si el marcha el motor y dejandolo funcionar hasta que el carburante termine el carburador este tractor no se va a usar pot 30 dias o mas. vado.
  • Page 59 IDENTIFICACIC)N DE PROBLEMAS: Vea la seccion apropiada en el manual a menos que_st6 dirigido a un centro de servicio Sears_ PROBLEMA CAUSA CORRECCION No arranca Sin combustible. Llene el estanque de combustible. Motor sin la"ESTRANGULACION" Vea"PARA HACER ARRANCAR EL MO- (CHOKE) adecuada.
  • Page 60 IDENTIFICACION DE PROBLEMAS: Yea la seccion apropiada en el manual a menos que este dirigido a un centro de servicio Sears. PROBLEMA CAUSA CORRECCI(_N Perdida de Agua en el combustible. Vaciar el estanque de combustibley el car- fuerza burador, vuelvaallenarelestanquecongaso- lina nuevay cambie el filtro de combustible.
  • Page 61 IDENTIFICACiON DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos que este dirigido a un centro de servicio Sears. PROBLEMA CAUSA CORRECCI(_N LOS agujeros de ventilacion del conjunto Limpie alrededor de los mandriles para abrir los de ventilaci6n. agujeros segador taponados debido a la acumulacion...
  • Page 63 GUiA SUGERIDA PARA IVIEDIR LAS PENDIENTES CON LA VISTA PARA UNA OPERACION SEGURA SOLAMENTE ANDE CUESTA ARRIBA O CUESTA ABAJO Y NO ATRAVIESE EL CERRO 15GRADOS MAX. DVERTENCIA: Para evitar daSos graves, haga funcionar su tractor arriba y abajo de ias pendientes, nunca transversalmente con respecto alas pendientes.
  • Page 64 NEED MORE You 1,1_ £nd the answe_ _and more on managemyhemeo{om,,- for free! :: ° Find this andat[ yourother product manuals online. :: o Get answersfrom our team of homeexperts. ::oGet apersooaLized maiote°ance ptao f or y our home. ::oFind i nformation and toots t ohelp with home projects.

Table of Contents