Installing Epson Twain Hs; For Windows Millennium Edition Users - Epson GT-30000 Setup Manual

Installing EPSON TWAIN HS

After connecting the scanner to your PC, install the scanner
software (EPSON TWAIN HS) from the CD-ROM. The
installation steps differ depending on the version of Windows.
For Windows Millennium Edition users, see the instructions on
this page.
For Windows 2000 users, see "For Windows 2000 users" on page
3-8.
For Windows 98 users, see "For Windows 98 users" on page 3-12.
For Windows 95 and NT 4.0 users, see "For Windows 95 and NT
4.0 users" on page 3-16.
Note:
If the scanner software is already installed and you are upgrading
your system to Windows 98, 2000, or Millennium Edition, be sure
to uninstall it before the upgrade, and then re-install it using the
same steps described in this section. For more information, see
"Maintenance and Troubleshooting" in your Online Reference
Guide.
To install the scanner software in Windows 2000 or NT 4.0, you
need to log on to Windows as an Administrator.

For Windows Millennium Edition users

Note:
If you use the Scanner and Camera Wizard to select a scanner driver,
EPSON recommends selecting the EPSON TWAIN driver to scan
images, not the "WIA" driver provided with Windows Millennium
Edition. See Windows online help for details on the Scanner and Camera
Wizard.
1. Connect your scanner to your PC.
Installing the Software
3
3-5