Sharp 54GT-25S Operation Manual page 12

Hide thumbs Also See for 54GT-25S:
Table of Contents

Advertisement

CLOCK button
In TV Mode: When the TEXT data is received, by pressing this button the real time
information will appear on the screen.
In TELETEXT Mode: When a selected Teletext page has hidden subpages or timed
pages, these pages can be seen by the following manner:
Press the CLOCK button f. Screen will shown "SUBPAGE: - - - "
Enter 4 digits corresponding to the subpage desired. E.g. 0021 for subpage num-
ber 21.
Wait until the page appears.
NOTE: You can use this button together with the CANCEL button k. This means
that you can view the main TV picture until the subpage has been found. The on
screen icon a at the top left side of the screen will change when the subpage has
been found.
Press the TEXT/MIX/PICTURE button a/b/Q to view the subpages.
CANCEL button
With this button Teletext information is cancelled and TV picture is restored. a
Indication is shown on screen.
In this position, the TV programme cannot be changed, being in Teletext/Cancelled
mode. When a change takes place in the Teletext information, the upper time of the
cancelled page or some other indication of special pages is shown on screen.
To uncancel, press TEXT/MIX/PICTURE button a/b/Q and the whole Teletext is
shown.
NOTE: This button can be used together with the CLOCK button f while awaiting
subpages.
How to Operate Page Memory - LIST Mode-
Your TV has 32 Teletext page number memories for fast recall of Teletext information.
In programme positions 0 through 6, four Teletext page numbers can be stored in
each position; a total of 28 pages.
In programme positions 7 through 99, only one programme with 4 page numbers
can be stored. If you try to store more than 4 page numbers in a programme position
between 7 and 99, the previously stored page numbers will be erased.
Select the programme channel number into which you want to store Teletext page
numbers.
Press the TEXT/MIX/PICTURE button a/b/Q to select the Teletext Mode.
Press the LIST button Q to change from FLOF system to LIST Mode.
Press a coloured button Q corresponding to the coloured brackets on the screen
for page number storage.
f
k
11

Advertisement

Table of Contents
loading

Table of Contents