Maintenance - Sharp QT-CD250H Operation Manual

<P=002>
RECORDING
When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
The VOLUME control may be adjusted with no
effect on the recorded signal. (Variable Sound
Monitor)
Metal and CrO tapes cannot be used for recor-
2
ding.
STOP PLAY / PAUSE
TUNING TUNING
REPEAT ON/STAND-BY
BAND (Function)
Recording from the built-in CD player
1
Set the function switch to CD.
Load the disc to be recorded.
2
Load the cassette into the cassette compart-
ment.
3
Press the RECORD button.
4
Press the PLAY/PAUSE (
0 6
To stop recording:
Press the STOP/EJECT button.
The tape will stop.
Note:
If the STOP( ) or PLAY/PAUSE (
on the CD player is pressed whilst recording, or
if the CD comes to its end, the tape deck will not
stop.
To record a specific track:
Press the UP ( ) or DOWN (
2 / 4
on the CD player until the desired track number is
displayed, then start recording.
Recording from the built-in radio
1
Set the function switch to TUNER.
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
To stop recording:
Press the STOP/EJECT button.
Erasing a recorded tape
1
Set the function switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
3
Press the RECORD button.

MAINTENANCE

Internal care
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
After long use, the deck's heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser's
instructions carefully before use.
) button on the CD.
External care
) button
0 6
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry
cloth.
Do not use chemically treated cleaning cloths or
other chemicals.
) button
3 / 5
10
QT-CD250H(SUK) TINSE0043SJZZ