Listening To The Radio - Sharp XL-MP110DVD Operation Manual

Listening to the radio

XL-MP110DVD
/
Auto power on function:
When you press any of the following buttons, the unit turns on.
I TUNER (BAND) button (main unit and remote control): The unit turns on
and the "TUNER" function is activated.
I 0 button on the remote control or main unit: The unit turns on and playback
of the last function starts (DVD/CD/TAPE/TUNER/VIDEO).
53
XL-MP110DVD(EN)53-54 53
/
Tuning
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (X or W) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
I When radio interference occurs, auto scan tuning may stop
automatically at that point.
I Auto scan tuning will skip weak signal stations.
I To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
I "j" will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
I If the FM reception is weak, press the TUNER (BAND) button to extinguish
the "ST" indicator. The reception changes to monaural, and the sound
becomes clearer.
4/28/05, 8:50 AM