Sharp AR-C260 Software Installation Manual page 14

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
Installation method 3
Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable.
2. Windows version: Windows 98/Me/2000*
NOTE
*1 To install the software using the installer, you must have administrator's rights.
Installing the software in Windows 98/Me or Windows 2000 (USB/interface)
Install the software as follows.
Before starting the installation, make sure the USB interface cable is not connected to the machine.
The procedure for installing the printer driver is explained here using Windows Me as an example.
1 Insert the "PRINTER UTILITIES" CD-ROM
that accompanied the machine into your
CD-ROM drive.
Double-click [My Computer], and then
2
double-click the CD-ROM icon.
3 Double-click the [SETUP] icon.
4 The Licence Agreement window will
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
5 After confirming the message in the
"Welcome" window, click the [Next]
button.
Follow the on-screnn instructions.
6
7 Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
12
1
8 Click the [Next] button.
9 Click the [Custom installation] button.
10 Click the [Connected to this computer]
and click the [Next] button.
11 When you are asked to select the
interface, select [USB] and click the [Next]
button.