To Play The Contents Between The Specified Points Repeatedly (A-B Repeat); To Select A Subtitle Or Audio Language From The Disc Menu - Sharp DV-SL2000W Operation Manual

Useful operation (continued)
DV-SL2000W
To play the contents between the specified
H
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
1
Whilst a disc is playing, press the A-B button.
TV screen
A TO B SET A
This registers the start point (A).
2
Press the A-B button again to enter the end point (B).
TV screen
A TO B SET B
This starts A-B repeat from the start point (A) to the end point (B).
3
Press the A-B button to return to the normal playback.
Notes:
I A-B repeat play is disabled on some discs.
I A-B repeat play for DVD is possible only within a title.
I A-B repeat play for SVCD/VCD is possible only within a track.
I Some scenes on DVD may not allow A-B repeat play.
33
Useful operation (continued)
H
You can select the desired subtitle or audio language and sound system
[Dolby Digital (5.1ch) or DTS sound] on your DVD if it has a disc menu.
1
Unit display
PRESET CHP PROG SLEEP REPEAT 1 B
A
KHz
MHz
2
Or use the direct number buttons for some discs.
Unit display
Note:
The procedure shown here provides only general steps. The actual procedure
for using the disc menu depends on the disc. See the disc jacket for details.
REPEAT 1 B
PR
A-B
KHz
MHz
To select a subtitle or audio language from
the disc menu
Whilst in the stop or playback
mode, press the MENU/PBC button
to display the disc menu.
Press the 5, 4, 2 or 3 button to change the setting
and press the ENTER button.
Example
1.Highlights
2.Start Movie