Table of Contents
Advertisement
E8
SETTING AND ADJUSTMENT (Continued)
Picture adjustment
!
Press
to call MENU screen.
MENU
@
Press
/
to select "PICTURE".
CH
CH
#
Press
/
to display PICTURE menu.
$
Press
/
to select adjustment items.
CH
CH
%
Adjust using
/
.
• Wait for approximately three seconds to return to PICTURE menu.
^
Repeat steps 4 and 5 above to adjust other items.
&
Press
until normal screen appears.
MENU
The following table lists the adjustment items shown in the PICTURE menu and how they
change as you press
/
.
Selected item
Press
CONTRAST
-
To decrease contrast
COLOUR
-
For less colour intensity
BRIGHTNESS
-
For less brightness
TINT
To move tint toward red
SHARPNESS
-
For less sharpness
To more reddish
WHITE TEMP
background
*: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• WHITE TEMP can only be adjusted on PICTURE menu.
Sound adjustment
!
Press
to call MENU screen.
MENU
@
Press
/
to select "SOUND".
CH
CH
#
Press
/
to display SOUND menu.
$
Press
/
to select adjustment items.
CH
CH
%
Adjust using
/
.
• Wait for approximately three seconds to return to SOUND menu.
^
Repeat steps 4 and 5 above to adjust other items.
&
Press
until normal screen appears.
MENU
The following table lists the adjustment items shown in the SOUND menu and how they
change as you press
/
.
Selected item
Press
ON
ON
SURROUND*
TREBLE
-
To decrease treble
BASS
-
To decrease bass
To shift balance
BALANCE
toward left
* When SURROUND is set to "ON " or "ON ", BALANCE cannot be selected.
• If BALANCE is adjusted and not in centre (0), SURROUND cannot be selected.
• Pressing
while a PICTURE/SOUND selection is displayed, only the selected mode is reset to the standard
NORMAL
(factory-setting) position.
• Pressing
while a PICTURE/SOUND menu screen is displayed will reset all the item of PICTURE/SOUND
NORMAL
menu to the standard (factory-setting) position.
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
PICTURE
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
WHITE TEMP
CONTRAST
-
Press
+
To increase contrast
+
For more colour intensity
+
For more brightness
To move tint toward green
+
For more sharpness
To more bluish background
LANGUAGE
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
SOUND
SURROUND
TREBLE
BASS
BALANCE
Press
OFF
+
To increase treble
TREBLE
-
+
To increase bass
To shift balance toward right
E9
TIMER SETTING
Off timer
Automatically turns power off after a set length of time has passed.
!
Press
MENU
@
50
Press
CH
0
+10
#
-10
Press
$
Press
CH
%
Press
off.
50
• Maximum time that can be preset is 12 hours and 50
+
minutes. Timer start to count down after setting.
^
Press
MENU
• Five minutes before the preset length of time expires, the remaining time
appears on the screen.
TV/VIDEO
• A flashing display of the remaining time appears during the last few seconds.
1
2
3
When the preset length of time has passed, the TV set enters the Standby
4
5
6
CH
mode.
7
8
9
CH
0
CH
CH
On timer
MENU
MENU
SURROUND
NORMAL
Automatically turns power on after a set length of time has passed.
!
NORMAL
Repeat step 1 to 3 of OFF TIMER.
TV
@
Press
CH
#
Press
on.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
CH
%
Press
OFF
^
+10
Repeat step 4 to 5 above to select and set the
-20
20
"VOLUME".
&
Press
MENU
*
Press
• Power indicator will flash to indicate On Timer is set.
+10
• When the preset length of time setting has passed, the power turns on and a
+
picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to preset
volume.
• The Off timer is cancelled if the power is turned off or set to the Standby mode using
on the TV set, or if the power is otherwise interrupted.
POWER
• The On Timer is cancelled if the power is turned off using
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons
are pressed on the TV set or remote control.
to call MENU screen.
/
to select "TIMER".
CH
/
to display TIMER menu.
/
to select "OFF
".
CH
/
to set time for TV to turn
until normal screen appears.
/
to select "ON
".
CH
/
to set time for TV to turn
/
to select "POSITION".
CH
/
to set the channel.
until normal screen appears.
to put TV set into Standby mode.
.
POWER
MENU
PICTURE
SOUND
FEATURE
TIMER
OFF
0:05
CH-SETTING
OFF
0:04
TIMER
OFF
--:--
ON
--:--
OFF
0:03
POSITION
VOLUME
--:--
OFF
0:02
TIMER
OFF
0:01
OFF
2:30
ON
--:--
POSITION
VOLUME
OFF
0:00
--:--
Flashing
TV/VIDEO
1
2
3
4
5
6
CH
7
8
9
CH
0
CH
CH
MENU
MENU
TIMER
SURROUND
NORMAL
OFF
--:--
LANGUAGE
ON
8:00
POSITION
--
--
VOLUME
--:--
TV
TIMER
OFF
--:--
ON
8:00
POSITION
CH28
VOLUME
--
--:--
[ TV Set ]
TIMER
OFF
--:--
ON
8:00
POSITION
CH28
VOLUME
20
--:--
Power indicator
(Flashing)
on the remote control or
Advertisement
Table of Contents
