Compact Disc Operation - Sharp QT-CD161H Operation Manual

Portable cd stereo system
Hide thumbs Also See for QT-CD161H:
Table of Contents

Advertisement

<P=005>

COMPACT DISC OPERATION

STOP
PAUSE
TUNING
BAND
POWER
REVIEW
PRESET
CD playback
1
Set the function switch to CD.
2
Press the CD EJECT button to open the CD
compartment.
3
Place a compact disc on the spindle, label side
up.
8 cm (3") discs may be played without an adap-
tor.
4
Close the CD compartment by firmly pushing the
corner marked "PUSH CLOSE".
To ta l n um-
Total playing
ber of tracks
time
5
Press the PLAY/REPEAT (
playback from track 1.
To interrupt playback:
Press the PAUSE BAND (
6
To resume playback:
Press the PLAY/REPEAT (
To stop playback:
Press the STOP ( ) button.
6
Rotate the VOLUME control towards right to
increase the volume, and towards left to de-
crease the volume.
7
Set the X-BASS switch to ON to emphasise the
bass region of the frequency spectrum.
Set the X-BASS switch to OFF to cancel the extra
bass mode.
2
PLAY/REPEAT
/
TUNING
3
4
/
CUE
/
PRESET
Playing time of
the first track
) button to start
0 R
) button.
) button.
0 R
5
QT-CD161H(SUK) TINSE0026SJZZ
/
PRESET
BAND
Precautions:
When "no diSC" or track number is displayed,
the power is connected.
If you will not be using the CD player, set the
ON/STAND-BY switch to STAND-BY.
Do not open the CD compartment whilst the
disc is rotating.
If the disc is damaged, dirty, or loaded upside
down, "Er" or "no diSC" will appear in the
display.
Clean, replace, or reload the disc properly.
Keep foreign objects out of the CD compart-
ment.
Subjecting the unit to shock or vibration may
cause mistracking.
Keep the CD compartment closed except
when loading discs.
Playing certain compact discs at a high vol-
ume may cause mistracking. In this case,
listen at a lower volume.
The temperature range for playing compact
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
To listen again to the track being played:
Press the
button for less than 0.5 seconds
5
during playback.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds
4
during playback.
Notes:
To skip a number of tracks at one time, press the
(
) or
(
4
2/4
5
3/5
until the desired track number is shown.
To start playback from a desired track, press the
(
) or
(
4
2/4
5
3/5
stop mode to select the track number, and then
press the PLAY/REPEAT (
/
TUNING
/
PRESET
TUNING
) button repeatedly
) button whilst in the
) button.
0 R

Advertisement

Table of Contents
loading

Table of Contents