Sharp MD-MT877H Operation Manual page 32

Advanced Recording (continued)
To start recording from the middle of a track
You can erase a portion of a track and make a new
recording.
All of the tracks that follow the newly recorded track will be
erased.
E-25
1
During playback, press the 06
point where you want to begin recording.
2
Press the REC button.
To cancel the operation, press the • /:OFF button.
3
Press the ENTER button.
All of the tracks and track names will be erased, fol-
lowing the point where the playback is paused.
4
Press the MODE button repeatedly to se-
lect recording mode (page 23).
5
Press the 06 06 button.
06 06 06
Recording will start.
Note:
To keep a track after the point you want to make a new re-
cording, move the track and then make recording after that
point.
(See "Editing a Recorded MiniDisc", page 43.)
06 button at the
06 06 06