Sharp MD-MT280E Operation Manual page 47

Recording and editing are impossible.
" Is the MiniDisc protected against accidental eras-
ure?
" Is the unit connected properly to the other equip-
ment?
" Is the AC adaptor unplugged or did a power failure
occur whilst recording or editing?
" Is the unit in the hold mode?
" Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo sys-
tem.
! If trouble occurs
When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately
30 seconds.
4. Plug the AC adaptor back into the wall socket and re-
operate the unit.
! Moisture condensation
When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.
In the following cases, condensation may form inside the
unit.
" Shortly after turning on a heater.
" When the unit is placed in a room where there is
excessive steam or moisture.
" When the unit is moved from a cool place to a warm
place.
To remove condensation:
Remove the MiniDisc and leave the unit for approxi-
mately 1 hour. The condensation should evaporate and
the unit will work properly.
03/1/16 MD_MT280E_UK_6.fm
MD-MT280E
6
5
4
3
2
1
47