Using With The Ac Adaptor - Sharp MD-MT170E Operation Manual

About charging time
After about 3.5 hours have passed, "
go out. The battery is charged up to 90% if it is
completely discharged.
To charge the battery fully, continue charging for about 2
more hours. In this case, you do not need to press the
MENU/CHRG button. Even if the MENU/CHRG button is
pressed, " " will not appear.
Notes:


Charge the battery within the
range of 5°C - 35°C (41°F - 95°F).


The unit can be left in the charg-
ing state after it is completed.


Carry the battery in the supplied
case. Apply the case on the end.
Caution:


Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.


Do not remove the outer cover of
the rechargeable battery. It may
cause heat generation, fire, or ex-
plosion.


Do not dip the battery in water, do
not dispose of it in a fire, and do
not take it apart.


If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.


Do not disassemble the battery.

Using with the AC Adaptor

Plug the AC adaptor into the wall socket, and then insert the
plug on the other end into the DC IN 5V socket.
" will
AC 230V, 50/60Hz
Caution:


Insert the plugs firmly.


When the unit is not in use for extended periods, remove
the AC adaptor from the wall socket.
Note:


If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise,
playback may start automatically when the electricity sup-
ply resumes.
01/10/26
MD-MT170E
To the DC IN 5V socket
9
MD-MT170E_2.fm