Advertisement
Listening to Bluetooth enabled devices
H H H H H Getting started
This DK-V2 speaker enables audio streaming from any Bluetooth source device ( eg: mobile phone )
which supports A2DP ( Advanced Audio Distribution Profile ) Bluetooth profile.
Before you can enjoy the music on this speaker, refer your source device operating manual on how to:
switch on the Bluetooth functionality on your source device.
set it to search for Bluetooth devices.
select Bluetooth device from the list of found devices.
pair and connect the Bluetooth device to the source device.
H H H H H Pairing with other Bluetooth source device
H H H H H To finish listening
Switch off the Bluetooth connection on your source
device, or
Stop and turn off the music on your source device, or
Turn off this speaker.
Bluetooth Connection
Audio stream
Bluetooth mobile phone
or other Bluetooth
source device
Make sure the Bluetooth functionality of the source device is
switched on.
Then, proceed as below:
Operation on DK-V2 speaker:
1
Press the ON/STAND-BY button to turn the power on.
2
Press and hold the PAIRING button for 1 second or more.
Release the button when the pairing indicator (blue) starts
blinking.
This speaker is now ready to be searched by other
Bluetooth devices.
Note : Pairing indicator (blue) will stop blinking once the
Operation on source device:
1
Perform pairing procedure on the source device to detect
this speaker.
Refer your source device operating manual for details.
2
Select "DK-V2" from the source list. If Passcode is
required, enter "0000".
3
Start the music from the appropriate menu on your source
device. You may now enjoy listening to the music from this
speaker.
H H H H H To reconnect source device to unit
Once paired, it is not necessary to pair them again.
(Refer DK-V2 operation manual page 11)
Proceed as below:
Operation on DK-V2 speaker:
1
Press the ON/STAND-BY button to turn the power on.
Then press the PAIRING button.
Operation on source device:
1
Turn on the Bluetooth functionality on your source
device.
2
Select "DK-V2" from the source list of paired device.
3
Start the music from the appropriate menu on your
source device. You may now enjoy listening to the
music from this speaker.
unit is successfully paired with source device.
Advertisement
